Isik, Murat and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Yıldız, Mehmet and Aydoğan, Eda and Koç, Bahattin (2024) "The effect of additively and subtractively created center internal features on microstructure and mechanical performance of inconel-718 parts", Rapid Prototyping Journal, Vol.30, No.2, 287-304 (SCI)
Acar, Anıl Ahmet and Daskalakis, Evangelos and Bartolo, Paulo and Weightman, Andrew and Cooper, Glen and Blunn, Gordon and Koç, Bahattin (2024) "Customized scaffolds for large bone defects using 3D-printed modular blocks from 2D-medical images", Bio-Design and Manufacturing, Vol.7, No.1, 74-87 (SCI)
Ahmed, Faran and Kılıç, Kemal (2023) "A basic algorithm for generating an individualized numerical scale[Formula presented]", Expert Systems with Applications, Vol.233 (SCI)
Ebrahimi Araghizad, Arash and Tehranizadeh, Faraz and Kılıç, Kemal and Budak, Erhan (2023) "Smart tool-related faults monitoring system using process simulation-based machine learning algorithms", Journal of Machine Engineering, Vol.23, No.4, 18-32 (NA)
Bagherzadeh, Amin and Budak, Erhan and Ozlu, Emre and Koç, Bahattin (2023) "Machining behavior of Inconel 718 in hybrid additive and subtractive manufacturing", CIRP Journal of Manufacturing Science and Technology, Vol.46, 178-190 (SCI)
Çatay, Bülent and Sadati, İhsan (2023) "An improved matheuristic for solving the electric vehicle routing problem with time windows and synchronized mobile charging/battery swapping", Computers and Operations Research, Vol.159 (SCI)
Zarrabi, Ali and Perrin, David and Kavoosi, Mahboubeh and Sommer, Micah and Sezen, Serap and Mehrbod, Parvaneh and Bhushan, Bhavya and Machaj, Filip and Rosik, Jakub and Kawalec, Philip and Afifi, Saba and Bolandi, Seyed Mohammadreza and Koleini, Peiman and Taheri, Mohsen and Madrakian, Tayyebeh and Łos, Marek J. and Lindsey, Benjamin and Çakır, Nilüfer and Zarepour, Atefeh and Hushmandi, Kiavash and Fallah, Ali and Koç, Bahattin and Khosravi, Arezoo and Ahmadi, Mazaher and Logue, Susan and Orive, Gorka and Pecic, Stevan and Gordon, Joseph W. and Ghavami, Saeid (2023) "Rhabdomyosarcoma: current therapy, challenges, and future approaches to treatment strategies", Cancers, Vol.15, No.21 (SCI)
Moradi, Nima and Sadati, İhsan and Çatay, Bülent (2023) "Last mile delivery routing problem using autonomous electric vehicles", Computers and Industrial Engineering, Vol.184 (SCI)
Koca, Esra and Koksalan, G. Irmak (2023) "Capacitated lot sizing problem with periodic carbon emission constraints and multiple resources", International Journal of Production Research, Vol.61, No.19, 6589-6601 (SCI)
Çelik, Dilara and
Karaca, Ali and
Koç, Bahattin (2023) "Directed energy deposition of parts with internal channels using removable graphite supports". Published Online First
https://dx.doi.org/10.1089/3dp.2023.0057 Koca, Esra (2023) "Two-stage stochastic facility location problem with disruptions and restricted shortages", Computers and Industrial Engineering, Vol.183 (SCI)
Akbari, Vahid and Sadati, İhsan and Salman, F. Sibel and Shiri, Davood (2023) "Minimizing total weighted latency in home healthcare routing and scheduling with patient prioritization", OR Spectrum, Vol.45, No.3, 807-852 (SCI)
Bilici, Çiğdem and Altunbek, Mine and Afghah, Ferdows and Tatar, Asena Gülenay and Koç, Bahattin (2023) "Embedded 3D printing of cryogel-based scaffolds", ACS Biomaterials Science and Engineering, Vol.9, No.8, 5028-5038 (SCI)
Çetin, Ebru and Güçlü, Tandaç Fürkan and Kantarcıoğlu, Işık and Gaszek, Ilona K. and Toprak, Erdal and Atılgan, Ali Rana and Dedeoglu, Burcu and Atılgan, Canan (2023) "Kinetic barrier to enzyme inhibition is manipulated by dynamical local interactions in E. coli DHFR", Journal of Chemical Information and Modeling, Vol.63, No.15, 4839-4849 (SCI)
Neshat, Najmeh and Kaya, Murat and Ghaboulian Zare, Sara (2023) "Exploratory policy analysis for electric vehicle adoption in European countries: a multi-agent-based modelling approach", Journal of Cleaner Production, Vol.414 (SCI)
Uru, Cagin and Dayanik, Savas and Sezer, Semih Onur (2023) "Compound poisson disorder problem with uniformly distributed disorder time", Bernoulli, Vol.29, No.3, 2272-2294 (SCI)
Rahimzadeh Berenji, Kaveh and Budak, Erhan (2023) "A general model for uncut chip geometry, process kinematics, and mechanics of orthogonal turn-milling process", CIRP Journal of Manufacturing Science and Technology, Vol.43, 57-70 (SCI)
Fallah, Ali and Asif, Suleman and Gokcer, Gizem and Koç, Bahattin (2023) "4D printing of continuous fiber-reinforced electroactive smart composites by coaxial additive manufacturing", Composite Structures, Vol.316 (SCI)
Asgharieh Ahari, Sahand and Kocuk, Burak (2023) "A mixed-integer exponential cone programming formulation for feature subset selection in logistic regression", EURO Journal on Computational Optimization, Vol.11 (ESCI)
Tuncer, Deniz and Kocuk, Burak (2023) "An MISOCP-based decomposition approach for the unit commitment problem with AC power flows", IEEE Transactions on Power Systems, Vol.38, No.4, 3388-3400 (SCI)
Şentürk, Efsun and Bilici, Çiğdem and Afghah, Ferdows and Khan, Zaeema and Çelik, Süleyman and Wu, Chengtie and Koç, Bahattin (2023) "3D bioprinting of tyramine modified hydrogels under visible light for osteochondral interface", Biofabrication, Vol.15, No.3 (SCI)
Tunç, Lütfi Taner and Sheikhi, Mohammad (2023) "AFP tool path planning for manufacture of variable stiffness composites", CIRP Annals, Vol.72, No.1, 381-384 (SCI)
Tavakol Aghaei, Vahid and Ağababaoğlu, Arda and Bawo, Biram and Naseradinmousavi, Peiman and Yıldırım, Sinan and Yeşilyurt, Serhat and Onat, Ahmet (2023) "Energy optimization of wind turbines via a neural control policy based on reinforcement learning Markov chain Monte Carlo algorithm", Applied Energy, Vol.341 (SCI)
Yıldırım, Sinan and Khalafi, Mohammad and Güzel, Tayyar and Satık, Halil and Yılmaz, Murat (2023) "Supply curves in electricity markets: a framework for dynamic modeling and Monte Carlo forecasting", IEEE Transactions on Power Systems, Vol.38, No.4, 3056-3069 (SCI)
Kayacık, Sezen Ece and Kocuk, Burak and Yüksel, Tuğçe (2023) "The promise of EV-aware multi-period optimal power flow problem: cost and emission benefits", Sustainable Energy, Grids and Networks, Vol.34 (SCI)
Altunbek, Mine and Afghah, Seyedeh Ferdows and Fallah, Ali and Acar, Anıl Ahmet and Koç, Bahattin (2023) "Design and 3D printing of personalized hybrid and gradient structures for critical size bone defects", ACS Applied Bio Materials, Vol.6, No.5, 1873-1885 (ESCI)
Weng, Jian and Saelzer, Jannis and Berger, Sebastian and Zhuang, Kejia and Bagherzadeh, Amin and Budak, Erhan and Biermann, Dirk (2023) "Analytical and experimental investigations of rake face temperature considering temperature-dependent thermal properties", Journal of Materials Processing Technology, Vol.314 (SCI)
Rastani, Sina and Çatay, Bülent (2023) "A large neighborhood search-based matheuristic for the load-dependent electric vehicle routing problem with time windows", Annals of Operations Research, Vol.324, No.1-2, 761-793 (SCI)
Altunbek, Mine and Afghah, Ferdows and Çalışkan, Özüm Şehnaz and Yoo, James J. and Koç, Bahattin (2023) "Design and bioprinting for tissue interfaces", Biofabrication, Vol.15, No.2 (SCI)
Dayanık, Savaş and Sezer, Semih Onur (2023) "Model misspecification in discrete time Bayesian online change detection", Methodology and Computing in Applied Probability, Vol.25, No.1 (SCI)
Liu, Gökşin and Ekmen, Erhan and Jalalypour, Farzaneh and Mertens, Haydyn D. T. and Jeffries, Cy M. and Svergun, Dmitri and Atılgan, Ali Rana and Atılgan, Canan and Sayers, Zehra (2023) "Conformational multiplicity of bacterial ferric binding protein revealed by small angle x-ray scattering and molecular dynamics calculations", Journal of Chemical Physics, Vol.158, No.8 (SCI)
Daskalakis, Evangelos and Hassan, Mohamed H. and Omar, Abdalla M. and Acar, Anıl Ahmet and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo (2023) "Accelerated degradation of poly-ε-caprolactone composite scaffolds for large bone defects", Polymers, Vol.15, No.3 (SCI)
Kendibilir, Abdullah and
Polat, Mehmet Furkan and
Çavuş, Ömer Safa and
Khalilvandi Behrouzyar, Sina and Motlagh, Peyman Lahe and
Koç, Bahattin and
Kefal, Adnan (2023)
"Combination of peridynamics and genetic algorithm based topology optimization methods for additive manufacturing-friendly designs",
Journal of Additive Manufacturing Technologies, Vol.2, No.1 (NA)
Özbaygın, Gizem and Karasan, Oya E. and Kara, Bahar Y. and Campbell, James F. and Ozel, Aysu (2023) "Exact solution approaches for the minimum total cost traveling salesman problem with multiple drones", Transportation Research Part B: Methodological, Vol.168, 81-123 (SCI, SSCI)
Dayanık, Savaş and Sezer, Semih Onur (2023) "Optimal dynamic multi-keyword bidding policy of an advertiser in search-based advertising", Mathematical Methods of Operations Research, Vol.97, No.1, 25-56 (SCI)
Arlı, Cihan and Atılgan, Ali Rana and Mısırlıoğlu, Burç (2023) "Volumetric effects in electrocaloric response of ferroelectric thin films", Journal of Materials Chemistry C, Vol.11, No.3, 1134-1143 (SCI)
Schmitz, Tony and Betters, Emma and Budak, Erhan and Yüksel, Esra and Park, Simon and Altıntaş, Yusuf (2023) "Review and status of tool tip frequency response function prediction using receptance coupling", Precision Engineering, Vol.79, 60-77 (SCI)
Çetin, Ebru and Atılgan, Ali Rana and Atılgan, Canan (2022) "DHFR mutants modulate their synchronized dynamics with the substrate by shifting hydrogen bond occupancies", Journal of Chemical Information and Modeling, Vol.62, No.24, 6715-6726 (SCI)
Karabulut Türkseven, Ezgi and Gholizadeh, Fatemeh and Akhavan, Raha (2022) "The value of adaptive menu sizes in peer-to-peer platforms", Transportation Research Part C: Emerging Technologies, Vol.145 (SCI)
Daskalakis, Evangelos and Huang, Boyang and Hassan, Mohamed H. and Omar, Abdalla M. and Vyas, Cian and
Acar, Anıl Ahmet and
Fallah, Ali and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and
Koç, Bahattin and Bartolo, Paulo (2022) "In vitro evaluation of pore size graded bone scaffolds with different material composition". Published Online First
http://dx.doi.org/10.1089/3dp.2022.0138Kendibilir, Abdullah and Kefal, Adnan and Sohouli, A. and Yıldız, Mehmet and Koç, Bahattin and Suleman, A. (2022) "Peridynamics topology optimization of three-dimensional structures with surface cracks for additive manufacturing", Computer Methods in Applied Mechanics and Engineering, Vol.401, No.Part B (SCI)
Kanavetas, Odysseas and Balcıoğlu, Barış (2022) "The "Sensitive" Markovian queueing system and its application for a call center problem", Annals of Operations Research, Vol.317, No.2, 651-664 (SCI)
Sahba, Pedram and Balcıoğlu, Barış and Banjevic, Dragan (2022) "The impact of disruption characteristics on the performance of a server", Annals of Operations Research, Vol.317, No.1, 239-252 (SCI)
Jamshidi, Hamid and
Budak, Erhan (2022) "A digital twin-based framework for selection of grinding conditions towards improved productivity and part quality". Published Online First
https://dx.doi.org/10.1007/s10845-022-02031-x Seyfi, Majid and Alinaghian, Mahdi and Ghorbani, Erfan and Çatay, Bülent and Saeid Sabbagh, Mohammad (2022) "Multi-mode hybrid electric vehicle routing problem", Transportation Research Part E: Logistics and Transportation Review, Vol.166 (SCI, SSCI)
Fallah, Ali and Altunbek, Mine and Bartolo, Paulo and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin (2022) "3D printed scaffold design for bone defects with improved mechanical and biological properties", Journal of the Mechanical Behavior of Biomedical Materials, Vol.134 (SCI)
Alparslan, Barış and Yıldırım, Sinan (2022) "Statistic selection and MCMC for differentially private Bayesian estimation", Statistics and Computing, Vol.32, No.5 (SCI)
Duman, Ece Naz and Taş, Duygu and Çatay, Bülent (2022) "Branch-and-price-and-cut methods for the electric vehicle routing problem with time windows", International Journal of Production Research, Vol.60, No.17, 5332-5353 (SCI)
Budak, Erhan and Matsubara, Atsushi and Donmez, Alkan and Munoa, Jokin (2022) "Mechanical interfaces in machine tools", CIRP Annals, Vol.71, No.2, 647-670 (SCI)
Bartolo, Paulo and Malshe, Ajay and Ferraris, Eleonora and Koç, Bahattin (2022) "3D bioprinting: materials, processes, and applications", CIRP Annals, Vol.71, No.2, 577-597 (SCI)
Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Yıldız, Saltuk and Budak, Erhan (2022) "Chatter stability of thin-walled part machining using special end mills", CIRP Annals, Vol.71, No.1, 365-368 (SCI)
Hesam Sadati, Mir Ehsan and Akbari, Vahid and Çatay, Bülent (2022) "Electric vehicle routing problem with flexible deliveries", International Journal of Production Research (SI), Vol.60, No.13, 4268-4294 (SCI)
Bagherzadeh, Amin and Koç, Bahattin and Budak, Erhan and Işık, Murat (2022) "High-speed machining of additively manufactured Inconel 718 using hybrid cryogenic cooling methods", Virtual and Physical Prototyping, Vol.17, No.3, 419-436 (SCI)
Rahimzadeh Berenji, Kaveh and Budak, Erhan (2022) "Improved machining performance through turn-milling", Journal of Machine Engineering, Vol.22, No.2, 5-17 (NA)
Maleki-Ghaleh, H. and Shakeri, M. S. and Dargahi, Z. and Kavanlouei, M. and Kaveh Garabagh, H. and Moradpur-Tari, E. and Yourdkhani, A. and Fallah, Ali and Zarrabi, A. and Koç, Bahattin and Siadati, M. H. (2022) "Characterization and optical properties of mechanochemically synthesized molybdenum-doped rutile nanoparticles and their electronic structure studies by density functional theory", Materials Today Chemistry, Vol.24 (SCI)
Afghah, Seyedeh Ferdows and Iyison, Necla Birgul and Nadernezhad, Ali and Midi, Ahmet and Sen, Ozlem and Saner Okan, Burcu and Çulha, Mustafa and Koç, Bahattin (2022) "3D fiber reinforced hydrogel scaffolds by melt electrowriting and gel casting as a hybrid design for wound healing", Advanced Healthcare Materials, Vol.11, No.11 (SCI)
Tavakol Aghaei, Vahid and Ağababaoğlu, Arda and Yıldırım, Sinan and Onat, Ahmet (2022) "A real-world application of Markov chain Monte Carlo method for Bayesian trajectory control of a robotic manipulator", ISA Transactions, Vol.125, 580-590 (SCI)
Iglesias, Alexander and Tunç, Lütfi Taner and Özsahin, Orkun and Franco, Oier and Munoa, Jokin and Budak, Erhan (2022) "Alternative experimental methods for machine tool dynamics identification: a review", Mechanical Systems and Signal Processing, Vol.170 (SCI)
Bilgili, Deniz and Budak, Erhan and Altintas, Yusuf (2022) "Multibody dynamic modeling of five-axis machine tools with improved efficiency", Mechanical Systems and Signal Processing, Vol.171 (SCI)
Kocuk, Burak (2022) "Optimization problems involving matrix multiplication with applications in materials science and biology", Engineering Optimization, Vol.54, No.5, 786-804 (SCI)
Kuru, Nurdan and Birbil, Ş. İlker and Gürbüzbalaban, Mert and Yıldırım, Sinan (2022) "Differentially private accelerated optimization algorithms", SIAM Journal on Optimization, Vol.32, No.2, 795-821 (SCI)
Bilici, Çiğdem and Tatar, Asena Gülenay and Şentürk, Efsun and Dikyol, Caner and Koç, Bahattin (2022) "Bisulfite-initiated crosslinking of gelatin methacryloyl hydrogels for embedded 3D bioprinting", Biofabrication, Vol.14, No.2 (SCI)
Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner and Gönül, Bora (2022) "Development of a vision based pose estimation system for robotic machining and improving its accuracy using LSTM neural networks and sparse regression", Robotics and Computer Integrated Manufacturing, Vol.74 (SCI)
Balcıoğlu, Barış and Kanavetas, Odysseas (2022) "A dynamic prioritization policy for the callback option in a call center", Flexible Services and Manufacturing Journal, Vol.34, No.1, 40-64 (SCI)
Daskalakis, Evangelos and Huang, Boyang and Vyas, Cian and Acar, Anıl Ahmet and Liu, Fengyuan and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo (2022) "Bone bricks: the effect of architecture and material composition on the mechanical and biological performance of bone scaffolds", ACS Omega, Vol.7, No.9, 7515-7530 (SCI)
Aydogan, E. and El-Atwani, O. and Erdem, B. and Chen, W. Y. and Li, M. and Devaraj, A. and Koç, Bahattin and Maloy, S. A. (2022) "In-situ radiation response of additively manufactured modified Inconel 718 alloys", Additive Manufacturing, Vol.51 (SCI)
Atılgan, Ali Rana and Atılgan, Canan (2022) "Computational strategies for protein conformational ensemble detection", Current Opinion in Structural Biology, Vol.72, 79-87 (SCI)
Burak Okan, Osman and Turgut, Deniz and Atılgan, Canan and Atılgan, Ali Rana and Ozisik, Rahmi (2022) "Could network structures generated with simple rules imposed on a cubic lattice reproduce the structural descriptors of globular proteins?", Journal of Complex Networks, Vol.10, No.1 (SCI)
Yıldırım, Umman Mahir and Çatay, Bülent (2022) "An enhanced network-consistent travel speed generation scheme on time-dependent shortest path and routing problems", IEEE Transactions on Intelligent Transportation Systems, Vol.23, No.2, 873-884 (SCI)
Daskalakis, Evangelos and Huang, Boyang and Vyas, Cian and Acar, Anıl Ahmet and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon and Bartolo, Paulo (2022) "Novel 3D bioglass scaffolds for bone tissue regeneration", Polymers, Vol.14, No.3 (SCI)
Abdennebi, Anes and Elakaş, Anıl and Taşyaran, Fatih and Öztürk, Erdinç and Kaya, Kamer and Yıldırım, Sinan (2022) "Machine learning-based load distribution and balancing in heterogeneous database management systems", Concurrency and Computation: Practice and Experience, Vol.34, No.4 (SCI)
Dey, Santanu S. and Kocuk, Burak and Redder, Nicole (2022) "Node-based valid inequalities for the optimal transmission switching problem", Discrete Optimization, Vol.43 (SCI)
Papila, Melih and Atılgan, Ali Rana (2022) "All-composite honeycomb core sandwich structures: master curves for stiffness-based design", Forces in Mechanics, Vol.6 (NA)
Balanji, Hamid Majidi and Turgut, Ali Emre and Tunç, Lütfi Taner (2022) "A novel vision-based calibration framework for industrial robotic manipulators", Robotics and Computer Integrated Manufacturing, Vol.73 (SCI)
Dikyol, Caner and Altunbek, Mine and Bartolo, Paulo and Koç, Bahattin (2021) "Multimaterial bioprinting approaches and their implementations for vascular and vascularized tissues", Bioprinting, Vol.24 (NA)
Manna, Madhu Sudan and Tamer, Yusuf Talha and Gaszek, Ilona and Poulides, Nicole and Ahmed, Ayesha and Wang, Xiaoyu and Toprak, Furkan C.R. and Woodard, Da Nae R. and Koh, Andrew Y. and Williams, Noelle S. and Borek, Dominika and Atılgan, Ali Rana and Hulleman, John D. and Atılgan, Canan and Tambar, Uttam and Toprak, Erdal (2021) "A trimethoprim derivative impedes antibiotic resistance evolution", Nature Communications, Vol.12, No.1 (SCI)
Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Budak, Erhan (2021) "Dynamics and chatter stability of crest-cut end mills", International Journal of Machine Tools and Manufacture, Vol.171 (SCI)
Maleki-Ghaleh, Hossein and Hossein Siadati, M. and Fallah, Ali and Zarrabi, Ali and Afghah, Seyedeh Ferdows and Koç, Bahattin and Dalir Abdolahinia, Elaheh and Omidi, Yadollah and Barar, Jaleh and Akbari-Fakhrabadi, Ali and Beygi-Khosrowshahi, Younes and Adibkia, Khosro (2021) "Effect of zinc-doped hydroxyapatite/graphene nanocomposite on the physicochemical properties and osteogenesis differentiation of 3D-printed polycaprolactone scaffolds for bone tissue engineering", Chemical Engineering Journal, Vol.426 (SCI)
Hanay, Saltuk and Fallah, Ali and Şentürk, Efsun and Yetim, Zeliha and Afghah, Seyedeh Ferdows and Yılmaz, Hülya and Çulha, Mustafa and Koç, Bahattin and Zarrabi, Ali and Varma, Rajender S. (2021) "Exploiting urazole's acidity for fabrication of hydrogels and ion-exchange materials", Gels, Vol.7, No.4 (SCI)
Koca, Esra and Noyan, Nilay and Yaman, Hande (2021) "Two-stage facility location problems with restricted recourse", IISE Transactions, Vol.53, No.12, 1369-1381 (SCI)
Işık, Murat and
Kısa, Erdal and
Koç, Bahattin and
Yıldız, Mehmet and Pehlivanoğulları, Barış and Orhangül, Akın and Akbulut, Güray (2021)
"Topology optimization and manufacturing of engine bracket using electron beam melting",
Journal of Additive Manufacturing Technologies, Vol.1, No.3 (NA)
Poyraz, Özgür and Yasa, Evren and Tunç, Lütfi Taner and Kilicay, Koray (2021) "Parametric simulations for residual stresses and distortions of Inconel 625 fabricated by laser powder bed fusion additive manufacturing", Journal of Additive Manufacturing Technologies, Vol.1, No.2 (NA)
Rezaei, Hamed and Sadeghi, Mohammad Hossein and Budak, Erhan (2021) "Correction to: Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V (The International Journal of Advanced Manufacturing Technology, (2018), 95, 5-8, (1617-1634), 10.1007/s00170-017-1329-3)", International Journal of Advanced Manufacturing Technology, Vol.117, No.1-2, 689-690 (SCI)
Karabulut Türkseven, Ezgi and Ahmed, Shabbir and Nemhauser, George (2021) "Decentralized online integer programming problems with a coupling cardinality constraint", Computers and Operations Research, Vol.135 (SCI)
Dikyol, Caner and Altunbek, Mine and Koç, Bahattin (2021) "Embedded multimaterial bioprinting platform for biofabrication of biomimetic vascular structures", Journal of Materials Research (SI), Vol.36, No.19, 3851-3864 (SCI)
Piluso, Susanna and Akdeniz Skvortsov, Gözde and Altunbek, Mine and Afghah, Seyedeh Ferdows and Khani, Navid and Koç, Bahattin and Patterson, Jennifer (2021) "3D Bioprinting of molecularly engineered PEG-based hydrogels utilizing gelatin fragments", Biofabrication, Vol.13, No.4 (SCI)
Özbaygın, Gizem and Koca, Esra and Yaman, Hande (2021) "An exact solution approach for the inventory routing problem with time windows", Computers and Operations Research, Vol.134 (SCI, SSCI)
Maleki-Ghaleh, H. and Siadati, M. H. and Fallah, Ali and Koç, Bahattin and Kavanlouei, M. and Khademi-Azandehi, P. and Moradpur-Tari, E. and Omidi, Y. and Barar, J. and Beygi-Khosrowshahi, Y. and Kumar, Alan P. and Adibkia, Kh (2021) "Antibacterial and cellular behaviors of novel zinc-doped hydroxyapatite/graphene nanocomposite for bone tissue engineering", International Journal of Molecular Sciences, Vol.22, No.17 (SCI)
Jamshidi, Hamid and Budak, Erhan (2021) "A 3D analytical thermal model in grinding considering a periodic heat source under dry and wet conditions", Journal of Materials Processing Technology, Vol.295 (SCI)
Hesam Sadati, Mir Ehsan and Çatay, Bülent and Aksen, Deniz (2021) "An efficient variable neighborhood search with tabu shaking for a class of multi-depot vehicle routing problems", Computers and Operations Research, Vol.133 (SCI, SSCI)
Tanoumand, Neda and Ünlüyurt, Tonguç (2021) "An exact algorithm for the resource constrained home health care vehicle routing problem", Annals of Operations Research, Vol.304, No.1-2, 397-425 (SCI, SSCI)
Jamshidi, Hamid and Budak, Erhan (2021) "On the prediction of surface burn and its thickness in grinding processes", CIRP Annals, Vol.70, No.1, 285-288 (SCI)
Tunç, Lütfi Taner and Gönül, Bora (2021) "Effect of quasi-static motion on the dynamics and stability of robotic milling", CIRP Annals, Vol.70, No.1, 305-308 (SCI)
Akbari, Vahid and Sadatizamanabad, Mirehsan Hesam and Kian, Ramez (2021) "A decomposition-based heuristic for a multicrew coordinated road restoration problem", Transportation Research Part D: Transport and Environment, Vol.95 (SCI, SSCI)
Özcan, Yiğit and Tunç, Lütfi Taner and Kopacka, Jan and Çetin, Beril and Sulitka, Matej (2021) "Modelling and simulation of controlled depth abrasive water jet machining (AWJM) for roughing passes of free-form surfaces", International Journal of Advanced Manufacturing Technology, Vol.114, No.11-12, 3581-3596 (SCI)
Sadatizamanabad, Mirehsan Hesam and Çatay, Bülent (2021) "A hybrid variable neighborhood search approach for the multi-depot green vehicle routing problem", Transportation Research Part E: Logistics and Transportation Review, Vol.149 (SCI, SSCI)
Kocuk, Burak (2021) "Rational polyhedral outer-approximations of the second-order cone", Discrete Optimization, Vol.40 (SCI)
Wu, Zhongcao and Zhuang, Hui and Ma, Bing and Xiao, Yin and Koç, Bahattin and Zhu, Yufang and Wu, Chengtie (2021) "Manganese-doped calcium silicate nanowire composite hydrogels for melanoma treatment and wound healing", Research, Vol.2021 (SCI)
Kocuk, Burak (2021) "Conic reformulations for Kullback-Leibler divergence constrained distributionally robust optimization and applications", International Journal of Optimization and Control: Theories and Applications, Vol.11, No.2, 139-151 (NA)
Yıldırım, Sinan and Kurutmaz, M. Burak and Barsbey, Melih and Şimşekli, Umut and Cemgil, A. Taylan (2021) "Bayesian allocation model: marginal likelihood-based model selection for count tensors", IEEE Journal of Selected Topics in Signal Processing, Vol.15, No.3, 560-573 (SCI)
Güçlü, Tandaç Fürkan and Atılgan, Ali Rana and Atılgan, Canan (2021) "Dynamic community composition unravels allosteric communication in pdz3", Journal of Physical Chemistry B, Vol.125, No.9, 2266-2276 (SCI)
Bagherzadeh, Amin and Kuram, Emel and Budak, Erhan (2021) "Experimental evaluation of eco-friendly hybrid cooling methods in slot milling of titanium alloy", Journal of Cleaner Production, Vol.289 (SCI)
Koca, Esra (2021) "Stochastic lot sizing problem with carbon emission constraints", Gazi University Journal of Science, Vol.34, No.1, 148-160 (ESCI)
Daskalakis, Evangelos and Liu, Fengyuan and Huang, Boyang and Acar, Anıl Ahmet and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo (2021) "Investigating the influence of architecture and material composition of 3D printed anatomical design scaffolds for large bone defects", International Journal of Bioprinting, Vol.7, No.2 (SCI)
Güçlü, Tandaç Fürkan and Kocatuğ, Nazlı and Atılgan, Ali Rana and Atılgan, Canan (2021) "N-terminus of the third PDZ domain of PSD-95 orchestrates allosteric communication for selective ligand binding", Journal of Chemical Information and Modeling, Vol.61, No.1, 347-357 (SCI)
Keskin Özel, Merve and Çatay, Bülent and Laporte, Gilbert (2021) "A simulation-based heuristic for the electric vehicle routing problem with time windows and stochastic waiting times at recharging stations", Computers and Operations Research, Vol.125 (SCI, SSCI)
Kayacık, Sezen Ece and Kocuk, Burak (2021) "An MISOCP-based solution approach to the reactive optimal power flow problem", IEEE Transactions on Power Systems, Vol.36, No.1, 529-532 (SCI)
Altintas, Yusuf and Stepan, Gabor and Budak, Erhan and Schmitz, Tony and Kilic, Zekai Murat (2020) "Chatter stability of machining operations", Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol.142, No.11 (SCI)
Karabulut Türkseven, Ezgi and Ahmed, Shabbir and Nemhauser, George (2020) "Decentralized algorithms for distributed integer programming problems with a coupling cardinality constraint", Discrete Optimization, Vol.38 (SCI)
Sadatizamanabad, Mirehsan Hesam and Aksen, Deniz and Aras, Necati (2020) "A trilevel r-interdiction selective multi-depot vehicle routing problem with depot protection", Computers and Operations Research, Vol.123 (SCI, SSCI)
Davarnia, Danial and Kocuk, Burak and Cornuéjols, Gerard (2020) "Computational aspects of Bayesian solution estimators in stochastic optimization", INFORMS Journal on Optimization, Vol.2, No.4, 256-272 (NA)
Jamshidi, Hamid and Budak, Erhan (2020) "An analytical grinding force model based on individual grit interaction", Journal of Materials Processing Technology, Vol.283 (SCI)
Yüksel, Esra and Ertürk, Ahmet Semih and Budak, Erhan (2020) "A hybrid contact implementation framework for finite element analysis and topology optimization of machine tools", Journal of Manufacturing Science and Engineering, Vol.142, No.8 (SCI)
Özlü, Emre and Ebrahimi Araghizad, Arash and Budak, Erhan (2020) "Broaching tool design through force modelling and process simulation", CIRP Annals - Manufacturing Technology, Vol.69, No.1, 53-56 (SCI)
Dey, Santanu S. and Kocuk, Burak and Santana, Asteroide (2020) "Convexifications of rank-one-based substructures in QCQPs and applications to the pooling problem", Journal of Global Optimization, Vol.77, No.2, 227-272 (SCI)
Bilal, Diyar Khalis and Ünel, Mustafa and Yıldız, Mehmet and Koç, Bahattin (2020) "Realtime localization and estimation of loads on aircraft wings from depth images", Sensors, Vol.20, No.12 (SCI)
Araghi, Mojtaba and Balcıoğlu, Barış (2020) "Using discrete event simulation to fit probability distributions for autocorrelated service times", INFOR: Information Systems and Operational Research, Vol.58, No.1, 124-140 (SCI)
Kocuk, Burak and Cornuéjols, Gérard (2020) "Incorporating Black-Litterman views in portfolio construction when stock returns are a mixture of normals", Omega - International Journal of Management Science, Vol.91 (SCI, SSCI)
Afghah, Seyedeh Ferdows and Altunbek, Mine and Dikyol, Caner and Koç, Bahattin (2020) "Preparation and characterization of nanoclay-hydrogel composite support-bath for bioprinting of complex structures", Scientific Reports, Vol.10, No.1 (SCI)
Afghah, Seyedeh Ferdows and Ullah, Mohib and Zanjani, Jamal Seyyed Monfared and Süt, Pınar Akkuş and Şen, Özlem and Emanet, Melis and Saner Okan, Burcu and Çulha, Mustafa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Koç, Bahattin (2020) "3D printing of silver-doped polycaprolactone-poly(propylene succinate) composite scaffolds for skin tissue engineering", Biomedical Materials, Vol.15, No.3 (SCI)
Goharibajestani, Zahra and Akhlaghi Baghoojari, Omid and Akaoğlu, Can and Afghah, Ferdows and Khani, Navid and Hodaei, Amin and Koç, Bahattin and Akbulut, Özge (2019) "Incorporating steric hindrance into the additive design enables a robust formulation of alumina ink for extrusion-based 3D printing", ACS Applied Polymer Materials, Vol.1, No.12, 3279-3285 (SCI)
Frenk, Hans and Javadi Khatab, Sonya and Sezer, Semih Onur (2019) "An optimal stopping approach for the end-of-life inventory problem", Mathematical Methods of Operations Research, Vol.90, No.3, 329-363 (SCI, SSCI)
Frenk, Hans and Pehlivan, Canan and Sezer, Semih Onur (2019) "Order and exit decisions under non-increasing price curves for products with short life cycles", Mathematical Methods of Operations Research, Vol.90, No.3, 365-397 (SCI, SSCI)
Yavuz, Tonguc and Kundakcioglu, O. Erhun and Ünlüyurt, Tonguç (2019) "Exact and heuristic approaches to detect failures in failed k-out-of-n systems", Computers and Operations Research, Vol.112 (SCI)
Jamshidi, Hamid and Gürtan, Mert and Budak, Erhan (2019) "Identification of active number of grits and its effects on mechanics and dynamics of abrasive processes", Journal of Materials Processing Technology, Vol.273 (SCI)
Erdil, Ertunç and Yıldırım, Sinan and Tasdizen, Tolga and Çetin, Müjdat (2019) "Pseudo-marginal MCMC sampling for image segmentation using nonparametric shape priors", IEEE Transactions on Image Processing, Vol.28, No.11, 5702-5715 (SCI)
Özbaygın, Gizem and Savelsbergh, Martin (2019) "An iterative re-optimization framework for the dynamic vehicle routing problem with roaming delivery locations", Transportation Research Part B: Methodological, Vol.128, 207-235 (SCI, SSCI)
Afghah, Ferdows and Dikyol, Caner and Altunbek, Mine and Koç, Bahattin (2019) "Biomimicry in bio-manufacturing: developments in melt electrospinning writing technology towards hybrid biomanufacturing", Applied Sciences (Switzerland), Vol.9, No.17 (SCI)
Tehranizadeh, Faraz and Koca, Recep and Budak, Erhan (2019) "Investigating effects of serration geometry on milling forces and chatter stability for their optimal selection", International Journal of Machine Tools and Manufacture, Vol.144 (SCI)
Yıldırım, Sinan and Ermiş, Beyza (2019) "Exact MCMC with differentially private moves: revisiting the penalty algorithm in a data privacy framework", Statistics and Computing, Vol.29, No.5, 947-963 (SCI)
Rastani, Sina and Yüksel, Tuğçe and Çatay, Bülent (2019) "Effects of ambient temperature on the route planning of electric freight vehicles", Transportation Research Part D: Transport and Environment, Vol.74, 124-141 (SCI, SSCI)
Verl, Alexander and Valente, Anna and Melkote, Shreyes and Brecher, Christian and Ozturk, E. and Tunç, Lütfi Taner (2019) "Robots in machining", CIRP Annals, Vol.68, No.2, 799-822 (SCI)
Tamer, Yusuf Talha and Gazsek, Ilona K. and
Abdizadeh, Haleh and Batur, Tuğçe and Reynolds, Kimberly and
Atılgan, Ali Rana and
Atılgan, Canan and Toprak, Erdal (2019)
"High-order epistasis in catalytic power of dihydrofolate reductase gives rise to a rugged fitness landscape in the presence of trimethoprim selection",
Molecular Biology and Evolution, Vol.36, No.7, 1533-1550 (SCI)
Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan (2019) "Effects of turn-milling conditions on chip formation and surface finish", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 113-116 (SCI)
Keskin Özel, Merve and Laporte, Gilbert and Çatay, Bülent (2019) "Electric vehicle routing problem with time-dependent waiting times at recharging stations", Computers and Operations Research, Vol.107, 77-94 (SCI, SSCI)
Nadernezhad, Ali and Ünal, Serkan and Khani, Navid and Koç, Bahattin (2019) "Material extrusion-based additive manufacturing of structurally controlled poly(lactic acid)/carbon nanotube nanocomposites", International Journal of Advanced Manufacturing Technology (SI), Vol.102, No.5-8, 2119-2132 (SCI)
Ahmed, Faran and Kılıç, Kemal (2019) "Fuzzy analytic hierarchy process: a performance analysis of various algorithms", Fuzzy Sets and Systems, Vol.362, 110-128 (SCI, SSCI)
Koç, Bahattin and Acar, Anıl Ahmet and Weightman, Andrew and Cooper, Glen and Blunn, Gordon and Bartolo, Paulo (2019) "Biomanufacturing of customized modular scaffolds for critical bone defects", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 209-212 (SCI)
Kılıç, Kemal and Saygı, Menekşe Gizem and Sezer, Semih Onur (2019) "Exact and heuristic methods for personalized display advertising in virtual reality platforms", Journal of Industrial and Management Optimization, Vol.15, No.2, 833-854 (SCI, SSCI)
Tunç, Lütfi Taner (2019) "Smart tool path generation for 5-axis ball-end milling of sculptured surfaces
using process models", Robotics and Computer Integrated Manufacturing, Vol.56, 212-221 (SCI)
Tunç, Lütfi Taner and Zatarain, Mikel (2019) "Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 401-404 (SCI)
Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Topuz, Fuat and Afghah, Seyedeh Ferdows and Erman, Batu and Koç, Bahattin (2019) "Nanocomposite bioinks based on agarose and 2D nanosilicates with tunable flow properties and bioactivity for 3D bioprinting", ACS Applied Bio Materials, Vol.2, No.2, 796-806 (ESCI)
Akçapınar, Kudret and Gürbüz, Özgür and Ünlüyurt, Tonguç (2019) "Power allocation and routing for full-duplex multi hop wireless networks under full interference", Ad Hoc Networks, Vol.82, 91-99 (SCI)
Frenk, Hans and Javadi Khatab, Sonya and Pourakbar, Morteza and Sezer, Semih Onur (2019) "An exact static solution approach for the service parts end-of-life inventory problem", European Journal of Operational Research, Vol.272, No.2, 496-504 (SCI, SSCI)
Karaguzel, Umut and Budak, Erhan (2018) "Investigating effects of milling conditions on cutting temperatures through analytical and experimental methods", Journal of Materials Processing Technology, Vol.262, 532-540 (SCI)
Kayıkçı, Yaşanur and Mutlu, Aysun and Çatay, Bülent (2018) "A decision support system and its application for international sea-rail multimodal freight transportation operations (Uluslararası deniz-demir yolu kombine yük taşımacılığı operasyonları için bir karar destek sistemi ve uygulaması)", Uludağ University Journal of The Faculty of Engineering, Vol.23, No.4, 99-116 (NA)
Keskin Özel, Merve and Çatay, Bülent (2018) "A matheuristic method for the electric vehicle routing problem with time windows and fast chargers", Computers and Operations Research, Vol.100, 172-188 (SCI, SSCI)
Karadeniz Alver, Özlem and Ayvaz, Berk and Çatay, Bülent (2018) "A multi-objective reverse logistics network design for waste electrical and electronic equipment: the case of Istanbul (Atık elektrikli ve elektronik eşyalar için çok amaçlı bir tersine lojistik ağ tasarımı: İstanbul uygulaması)", Uludağ University Journal of The Faculty of Engineering, Vol.23, No.4, 41-54 (NA)
Kocuk, Burak and Dey, Santanu S. and Andy, X. Sun (2018) "Matrix minor reformulation and SOCP-based spatial branch-and-cut method for the AC optimal power flow problem", Mathematical Programming Computation, Vol.10, No.4, 557-596 (ESCI)
Topuz, Fuat and Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Menceloğlu, Yusuf Z. and Koç, Bahattin (2018) "Nanosilicate embedded agarose hydrogels with improved bioactivity", Carbohydrate Polymers, Vol.201, 105-112 (SCI)
Ross, Caroline and Nizami, Bilal and Glenister, Michael and Amamuddy, Olivier Sheik and Atılgan, Ali Rana and Atılgan, Canan and Bishop, Özlem Tastan (2018) "MODE-TASK: large-scale protein motion tools", Bioinformatics, Vol.34, No.21, 3759-3763 (SCI)
Tunç, Lütfi Taner and Mohammadi, Yaser and Budak, Erhan (2018) "Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems", Mechanical Systems and Signal Processing, Vol.111, 423-441 (SCI)
Toprakhisar, Burak and Nadernezhad, Ali and Bakırcı, Ezgi and Khani, Navid and Akdeniz Skvortsov, Gözde and Koç, Bahattin (2018) "Development of bioink from decellularized tendon extracellular matrix for 3D bioprinting", Macromolecular Bioscience, Vol.18, No.10 (SCI)
Tavakol Aghaei, Vahid and Onat, Ahmet and Yıldırım, Sinan (2018) "A Markov chain Monte Carlo algorithm for Bayesian policy search", Systems Science and Control Engineering, Vol.6, No.1, 438-455 (ESCI)
Tunç, Lütfi Taner and Ozsahin, Orkun (2018) "Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes", Advances in Manufacturing, Vol.6, No.3, 308-318 (SCI)
Mohammadi, Yaser and Azvar, Milad and Budak, Erhan (2018) "Suppressing vibration modes of spindle-holder-tool assembly through FRF modification for enhanced chatter stability", CIRP Annals - Manufacturing Technology, Vol.67, No.1, 397-400 (SCI)
Koca, Esra and Yaman, Hande and Aktürk, M. Selim (2018) "Stochastic lot sizing problem with nervousness considerations", Computers and Operations Research, Vol.94, 23-37 (SCI, SSCI)
Dayan, Cem Balda and Afghah, Seyedeh Ferdows and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Çulha, Mustafa and Koç, Bahattin (2018) "Modeling 3D melt electrospinning writing by response surface methodology", Materials & Design, Vol.148, 87-95 (SCI)
Cakir, Esin and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2018) "Investigation of temperature distribution in orthogonal cutting through dual-zone contact model on the rake face", International Journal of Advanced Manufacturing Technology, Vol.96, No.1-4, 81-89 (SCI)
Shahmoradi, Zahed and Ünlüyurt, Tonguç (2018) "Failure detection for series systems when tests are unreliable", Computers & Industrial Engineering, Vol.118, 309-318 (SCI)
Hodaei, Amin and Akhlaghi Baghoojari, Omid and Khani, Navid and Aytaş, Tunahan and Sezer, Dilek and Tatlı, Buse and Menceloğlu, Yusuf Z. and Koç, Bahattin and Akbulut, Özge (2018) "Single additive enables 3D printing of highly loaded iron oxide suspensions", ACS Applied Materials & Interfaces, Vol.10, No.11, 9873-9881 (SCI)
Rezaei, Hamed and Sadeghi, Mohammad Hossein and Budak, Erhan (2018) "Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V", International Journal of Advanced Manufacturing Technology, Vol.95, No.5-8, 1617-1634 (SCI)
Bagherzadeh, Amin and Budak, Erhan (2018) "Investigation of machinability in turning of difficult-to-cut materials using a
new cryogenic cooling approach", Tribology International, Vol.119, 510-520 (SCI)
Ross, Caroline Jane and Atılgan, Ali Rana and Taştan Bishop, Özlem and Atılgan, Canan (2018) "Unraveling the motions behind Enterovirus 71 uncoating", Biophysical Journal, Vol.114, No.4, 822-838 (SCI)
Azvar, Milad and Budak, Erhan (2017) "Multi-dimensional chatter stability for enhanced productivity in different parallel turning strategies", International Journal of Machine Tools and Manufacture, Vol.123, 116-128 (SCI)
Abdizadeh, Haleh and Atılgan, Ali Rana and Atılgan, Canan and Dedeoğlu, Burcu (2017) "Computational approaches for deciphering the equilibrium and kinetic properties of iron transport proteins", Metallomics, Vol.9, No.11, 1513-1533 (SCI)
Çinicioğlu, Esma Nur and Ulusoy, Gündüz and Önsel Ekici, Şule and Ülengin, Füsun and Ülengin, Burç (2017) "Exploring the interaction between competitiveness of a country and innovation using Bayesian networks", Innovation and Development, Vol.7, No.2, 175-209 (NA)
Brown, David K. and Penkler, David L. and Amamuddy, Olivier Sheik and Ross, Caroline and Atılgan, Ali Rana and Atılgan, Canan and Bishop, Özlem Taştan (2017) "MD-TASK: a software suite for analyzing molecular dynamics trajectories", Bioinformatics, Vol.33, No.17, 2768-2771 (SCI)
Yiğit, Ufuk and Ciğeroğlu, Ender and Budak, Erhan (2017) "Chatter reduction in boring process by using piezoelectric shunt damping with experimental verification", Mechanical Systems and Signal Processing, Vol.94, 312-321 (SCI)
Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan (2017) "Modelling thermally induced deformations on tool during turn-milling (Frezeyle tornalamada takımda ortaya çıkan termal deformasyonların modellenmesi)", Journal of the Faculty of Engineering and Architecture of Gazi University, Vol.32, No.3, 865-875 (SCI)
Yılmaz Eroğlu, D. and Kılıç, Kemal (2017) "A novel hybrid genetic local search algorithm for feature selection and weighting with an application in strategic decision making in innovation management", Information Sciences, Vol.405, 18-32 (SCI)
Esmaeili Aliabadi, Danial and Kaya, Murat and Şahin, Güvenç (2017) "Competition, risk and learning in electricity markets: an agent-based simulation study", Applied Energy, Vol.195, 1000-1011 (SCI, SSCI)
Bakırcı, Ezgi and Toprakhisar, Burak and Zeybek, Mehmet Can and Özaydın İnce, Gözde and Koç, Bahattin (2017) "Cell sheet based bioink for 3D bioprinting applications", Biofabrication, Vol.9, No.2 (SCI)
Daldal, Rebi and Özlük, Özgür and Selçuk, Barış and Shahmoradi, Zahed and Ünlüyurt, Tonguç (2017) "Sequential testing in batches", Annals of Operations Research, Vol.253, No.1, 97-116 (SCI)
Abdizadeh, Haleh and Tamer, Yusuf Talha and Acar, Ömer and Toprak, Erdal and Atılgan, Ali Rana and Atılgan, Canan (2017) "Increased substrate affinity in the escherichia coli L28R dihydrofolate reductase mutant causes trimethoprim resistance", Physical Chemistry Chemical Physics, Vol.19, No.18, 11416-11428 (SCI)
Abdizadeh, Haleh and Atılgan, Ali Rana and Atılgan, Canan (2017) "Mechanisms by which salt concentration moderates the dynamics of human serum transferrin", Journal of Physical Chemistry B, Vol.121, No.18, 4778-4789 (SCI)
Khani, Navid and Nadernezhad, Ali and Bartolo, Paulo and Koç, Bahattin (2017) "Hierarchical and spatial modeling and bio-additive manufacturing of multi-material constructs", CIRP Annals - Manufacturing Technology, Vol.66, No.1, 229-232 (SCI)
Kılıç, Kemal and Saygı, Menekşe Gizem and Sezer, Semih Onur (2017) "A mathematical model for personalized advertisement in virtual reality environments", Mathematical Methods of Operations Research, Vol.85, No.2, 241-264 (SCI)
Hosseini, Seyed Ahmad and Şahin, Güvenç and Ünlüyurt, Tonguç (2017) "A penalty-based scaling algorithm for the multi-period multi-product distribution planning problem", Engineering Optimization, Vol.49, No.4, 583-596 (SCI)
Allen, Sarah R. and Hellerstein, Lisa and Kletenik, Devorah and Ünlüyurt, Tonguç (2017) "Evaluation of monotone DNF formulas", Algorithmica, Vol.77, No.3, 661-685 (SCI)
Şensoy, Özge and Atılgan, Ali Rana and Atılgan, Canan (2017) "FbpA iron storage and release are governed by periplasmic microenvironments", Physical Chemistry Chemical Physics, Vol.19, No.8, 6064-6075 (SCI)
Frenk, Hans and Pourghannad, Behrooz and Sezer, Semih Onur (2017) "A static model in single leg flight airline revenue management", Transportation Science, Vol.51, No.1, 214-232 (SCI)
Esmaeili Aliabadi, Danial and Kaya, Murat and Şahin, Güvenç (2017) "An agent-based simulation of power generation company behavior in electricity markets under different market-clearing mechanisms", Energy Policy, Vol.100, 191-205 (SCI)
Özkırımlı, Ömer Mehmet and Tunç, Lütfi Taner and Budak, Erhan (2016) "Generalized model for dynamics and stability of multi-axis milling with complex tool geometries", Journal of Materials Processing Technology, Vol.238, 446-458 (SCI)
Esmaeili Aliabadi, Danial and Kaya, Murat and Şahin, Güvenç (2016) "Determining collusion opportunities in deregulated electricity markets", Electric Power Systems Research, Vol.141, 432-441 (SCI)
Ünlüyurt, Tonguç and Tunçer, Yasir (2016) "Estimating the performance of emergency medical service location models via discrete event simulation", Computers & Industrial Engineering, Vol.102, 467-475 (SCI)
Khani, Navid and Yıldız, Mehmet and Koç, Bahattin (2016) "Elastic properties of coiled carbon nanotube reinforced nanocomposite: a finite element study", Materials & Design, Vol.109, 123-132 (SCI)
Aksu, Burak and Çelebi, Ceren and Budak, Erhan (2016) "An experimental investigation of oblique cutting mechanics", Machining Science and Technology, Vol.20, No.3, 495-521 (SCI)
Nadernezhad, Ali and
Khani, Navid and
Akdeniz Skvortsov, Gözde and
Toprakhisar, Burak and
Bakırcı, Ezgi and
Menceloğlu, Yusuf Z. and
Ünal, Serkan and
Koç, Bahattin (2016)
"Multifunctional 3D printing of heterogeneous hydrogel structures",
Scientific Reports, Vol.6 (SCI)
Özler, Saime Burçe and
Bakırcı, Ezgi and
Küçükgül, Can and
Koç, Bahattin (2016) "Three-dimensional direct cell bioprinting for tissue engineering". Published Online First
http://dx.doi.org/10.1002/jbm.b.33768 Munoa, J. and Beudaert, X. and Dombovari, Z. and Altıntaş, Y. and Budak, Erhan and Brecher, C. and Stepan, G. (2016) "Chatter suppression techniques in metal cutting", CIRP Annals - Manufacturing Technology, Vol.65, No.2, 785-808 (SCI)
Dayanık, Savaş and Sezer, Semih Onur (2016) "Sequential sensor installation for Wiener disorder detection", Mathematics of Operations Research, Vol.41, No.3, 827-850 (SCI)
Tunç, Taner L. and Özkırımlı, Ömer Mehmet and Budak, Erhan (2016) "Machining strategy development and parameter selection in 5-axis milling based on process simulations", International Journal of Advanced Manufacturing Technology, Vol.85, No.5-8, 1483-1500 (SCI)
Tunç, Lütfi Taner and Budak, Erhan and Bilgen, Samet and Zatarain, Mikel (2016) "Process simulation integrated tool axis selection for 5-axis tool path generation", CIRP Annals - Manufacturing Technology, Vol.65, No.1, 381-384 (SCI)
Carlier, Aurelli and Akdeniz Skvortsov, Gözde and Hafezi, Forough and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin and Oosterwyck, Hans Van (2016) "Computational model-informed design and bioprinting of cell-patterned constructs for bone tissue engineering", Biofabrication, Vol.8, No.2 (SCI)
Daldal, Rebi and Gamzu, Iftah and Segev, Danny and Ünlüyurt, Tonguç (2016) "Approximation algorithms for sequential batch-testing of series systems", Naval Research Logistics, Vol.63, No.4, 275-286 (SCI)
Türker, Uraz Cengiz and Ünlüyurt, Tonguç and Yenigün, Hüsnü (2016) "Effective algorithms for constructing minimum cost adaptive distinguishing sequences", Information and Software Technology, Vol.74, 69-85 (SCI)
Karagüzel, Umut and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa (2016) "Effects of tool axis offset in turn-milling process", Journal of Materials Processing Technology, Vol.231, 239-247 (SCI)
Budak, Erhan and Özlü, Emre and Bakioğlu, Hayri and Barzegar Osgouei, Zahra (2016) "Thermo-mechanical modeling of the third deformation zone in machining for prediction of cutting forces", CIRP Annals - Manufacturing Technology, Vol.65, No.1, 121-124 (SCI)
Emeç, Uğur and Çatay, Bülent and Bozkaya, Burçin (2016) "An adaptive large neighborhood search for an e-grocery delivery routing problem", Computers and Operations Research, Vol.69, 109-125 (SCI)
Keskin, Merve and Çatay, Bülent (2016) "Partial recharge strategies for the electric vehicle routing problem with time windows", Transportation Research Part C: Emerging Technologies, Vol.65, 111-127 (SCI)
Davari, Soheil and Kılıç, Kemal and Naderi Varandi, Siamak (2016) "A heuristic approach to solve the preventive health care problem with budget and congestion constraints", Applied Mathematics and Computation, Vol.276, 442-453 (SCI)
Öztürk, Erdem and Çomak, Alptunç and Budak, Erhan (2016) "Tuning of tool dynamics for increased stability of parallel (simultaneous) turning processes", Journal of Sound and Vibration, Vol.360, 17-30 (SCI)
Abdizadeh, Haleh and Güven, Gökçe and Atılgan, Ali Rana and Atılgan, Canan (2015) "Perturbation response scanning specifies key regions in subtilisin serine protease for both function and stability", Journal of Enzyme Inhibition and Medicinal Chemistry, Vol.30, No.6, 867-873 (SCI)
Akhmedov, Murodzhon and Çatay, Bülent and Apaydın, Serkan Mehmet (2015) "Automating unambiguous NOE data usage in NVR for NMR protein structure-based assignments", Journal of Bioinformatics and Computational Biology, Vol.13, No.6 (SCI)
Özler, Saime Burçe and Küçükgül, Can and Koç, Bahattin (2015) "3-boyutlu biyobasım (3D bioprinting)", Türkiye Klinikleri Tıbbi Onkoloji Özel Dergisi, Vol.8, No.2, 155-161 (NA)
Özbaykal, Gizem and Atılgan, Ali Rana and Atılgan, Canan (2015) "In silico mutational studies of Hsp70 disclose sites with distinct functional attributes", Proteins: Structure, Function and Bioinformatics, Vol.83, No.11, 2077-2090 (SCI)
Köse, İlker and Göktürk, Mehmet and Kılıç, Kemal (2015) "An interactive machine-learning-based electronic fraud and abuse detection system in healthcare insurance", Applied Soft Computing, Vol.36, 283-299 (SCI)
Özşahin, Orkun and Budak, Erhan and Özgüven, H. Nevzat (2015) "Identification of bearing dynamics under operational conditions for chatter stability prediction in high speed machining operations", Precision Engineering, Vol.42, 53-65 (SCI)
Aslan, Deniz and Budak, Erhan (2015) "Surface roughness and thermo-mechanical force modeling for grinding operations with regular and circumferentially grooved wheels", Journal of Materials Processing Technology, Vol.223, 75-90 (SCI)
Abdizadeh, Haleh and Atılgan, Ali Rana and Atılgan, Canan (2015) "Detailed molecular dynamics simulations of human transferrin provide insights into iron release dynamics at serum and endosomal pH", Journal of Biological Inorganic Chemistry, Vol.20, No.4, 705-718 (SCI)
Karagüzel, Umut and Olgun, Utku and Uysal, Emre and Budak, Erhan and Bakkal, M. (2015) "Increasing tool life in machining of difficult-to-cut materials using nonconventional turning processes", International Journal of Advanced Manufacturing Technology, Vol.77, No.9-12, 1993-2004 (SCI)
Küçükgül, Can and
Özler, Saime Burçe and
İnci, İlyas and
Karakaş, Hacer Ezgi and
Irmak, Ster and
Gözüaçık, Devrim and
Taralp, Alpay and
Koç, Bahattin (2015)
"3D bioprinting of biomimetic aortic vascular constructs with self-supporting cells",
Biotechnology and Bioengineering, Vol.112, No.4, 811-821 (SCI)
Tunç, Lütfi Taner and Özkırımlı, Ömer Mehmet and Budak, Erhan (2015) "Generalized cutting force model in multi-axis milling using a new engagement boundary determination approach", International Journal of Advanced Manufacturing Technology, Vol.77, No.1-4, 341-355 (SCI)
Özşahin, Orkun and Budak, Erhan and Özgüven, H. Nevzat (2015) "In-process tool point FRF identification under operational conditions using inverse stability solution", International Journal of Machine Tools and Manufacture, Vol.89, 64-73 (SCI)
Arslan, Alp Muzaffer and Frenk, Hans and Sezer, Semih Onur (2015) "On the single-leg airline revenue management problem in continuous time", Mathematical Methods of Operations Research, Vol.81, No.1, 27-52 (SCI)
