Yayınlar

Yayınlar

LISTEN

Types

Dates

 to 

2015-2024

  • Makaleler
    Pashmforoush, Farzad and Ebrahimi Araghizad, Arash and Budak, Erhan (2024) "Physics-informed tool wear prediction in turning process: a thermo-mechanical wear-included force model integrated with machine learning", Journal of Manufacturing Systems, Vol.77, 266-283 (SCI)
    Bai, Lele and Zhang, Jun and Budak, Erhan and Tang, Yuyang and Zhao, Wanhua (2024) "Vibration energy-based indicators for multi-target condition monitoring in milling operations", Journal of Manufacturing Systems, Vol.77, 284-300 (SCI)
    Khanduzi, Raheleh and Sadati, İhsan and Akbari, Vahid (2024) "A bilevel hierarchical covering model to protect a healthcare network against failures", Operational Research, Vol.24, No.4 (SCI)
    Javidrad, Hamidreza and Isik, Murat and Koç, Bahattin (2024) "Crack elimination of laser powder directed energy deposition Inconel 738LC using in-situ addition of Inconel 718: a comprehensive study on the mechanical and corrosion resistivity properties", Journal of Alloys and Compounds, Vol.1004 (SCI)
    Charaf, Sara and Taş Küten, Duygu and Flapper, Simme Douwe P. and Van Woensel, Tom (2024) "A matheuristic for the two-echelon inventory-routing problem", Computers and Operations Research, Vol.171 (SCI)
    Jamshidi, Hamid and Bagherzadeh, Amin and Budak, Erhan and Ghadbeigi, Hassan (2024) "A predictive wear model in grinding using single-layer electroplated cBN tools", Journal of Manufacturing Processes, Vol.127, 251-258 (SCI)
    Nejatpour, Mona and Fallah, Ali and Koç, Bahattin (2024) "An overview of 4D printing of smart multifunction continuous fiber-reinforced composites: recent advances and novel applications", Advanced Composites and Hybrid Materials, Vol.7, No.5 (SCI)
    Charaf, Sara and Taş Küten, Duygu and Flapper, Simme Douwe P. and Van Woensel, Tom (2024) "A branch-and-price algorithm for the two-echelon inventory-routing problem", Computers & Industrial Engineering, Vol.196 (SCI)
    Zemzemoğlu, Muhammed and Ünel, Mustafa and Tunç, Lütfi Taner (2024) "Enhancing automated fiber placement process monitoring and quality inspection: a hybrid thermal vision based framework", Composites Part B: Engineering, Vol.285 (SCI)
    Rahimzadeh Berenji, Kaveh and Tehranizadeh, Faraz and Budak, Erhan (2024) "Chatter stability of orthogonal turn-milling process in frequency and discrete-time domains", Journal of Manufacturing Science and Engineering, Vol.146, No.9 (SCI)
    Ersoy, Serra and Yıldız, Erdost and Ren, Ziyu and Zhang, Mingchao and Zhang, Hongchuan and Karaz, Selcan and Han, Mertcan and Shiva, Anitha and Yunusa, Muhammed and Kaya, Cengiz and Koç, Bahattin and Sitti, Metin (2024) "Fabrication of gold nanoflower-coated photosensitive meta-structures using PμSL 3D printing for hyperthermia applications", ACS Applied Polymer Materials, Vol.6, No.17, 10807-10823 (SCI)
    Javidrad, Hamidreza and Aydin, Huseyin and Karakaş, Burak and Alptekin, Sertaç and Kahraman, Aylin Sahin and Koç, Bahattin (2024) "Process parameter optimization for laser powder directed energy deposition of Inconel 738LC", Optics and Laser Technology, Vol.176 (SCI)
    Güçlü, Tandaç Fürkan and Atılgan, Ali Rana and Atılgan, Canan (2024) "Deciphering GB1's single mutational landscape: insights from MuMi analysis". Published Online First https://dx.doi.org/10.1021/acs.jpcb.4c04916
    Kantarcıoğlu Mazmanoğlu, Işık and Gaszek, Ilona K. and Güçlü, Tandaç Fürkan and Yildiz, M. Sadik and Atılgan, Ali Rana and Toprak, Erdal and Atılgan, Canan (2024) "Structural shifts in TolC facilitate efflux-mediated β-lactam resistance", Communications Biology, Vol.7, No.1 (SCI)
    Sheikhi, Mohammad and Anamagh, Mirmeysam Rafiei and Bediz, Bekir and Tunç, Lütfi Taner (2024) "Conical-shaped variable stiffness composite laminates: design and fiber path planning", Materials and Design, Vol.244 (SCI)
    Akbari, Vahid and Çatay, Bülent and Sadati, İhsan (2024) "Route optimization of battery electric vehicles using dynamic charging on electrified roads", Sustainable Cities and Society, Vol.109 (SCI)
    Duman, Ece Naz and Taş Küten, Duygu and Çatay, Bülent (2024) "A bidirectional branch-and-price algorithm with pulse procedure for the electric vehicle routing problem with flexible deliveries", Transportation Research Part C: Emerging Technologies, Vol.165 (SCI)
    Tunç, Lütfi Taner and Gulmez, Deniz Arda (2024) "Tool path strategies for efficient milling of thin-wall features", Journal of Manufacturing and Materials Processing, Vol.8, No.4 (ESCI)
    Kuram, Emel and Bagherzadeh, Amin and Budak, Erhan (2024) "Application of cutting fluids in micro-milling - A review", International Journal of Advanced Manufacturing Technology, Vol.133, No.1-2, 25-58 (SCI)
    Shinba, Yuta and Irino, Naruhiro and Imabeppu, Yasuhiro and Budak, Erhan and Suzuki, Norikazu and Kishimoto, Atsuo (2024) "Improvement of surface quality in simultaneous machining of multiple workpieces on a single machine", CIRP Annals, Vol.73, No.1, 305-308 (SCI)
    Ebrahimi Araghizad, Arash and Tehranizadeh, Faraz and Pashmforoush, Farzad and Budak, Erhan (2024) "Milling process monitoring based on intelligent real-time parameter identification for unmanned manufacturing", CIRP Annals, Vol.73, No.1, 325-328 (SCI)
    Mesüm, Oğuz and Atılgan, Ali Rana and Kocuk, Burak (2024) "A stochastic programming approach to the antibiotics time machine problem", Mathematical Biosciences, Vol.372 (SCI)
    İslim, Raci Berk and Çatay, Bülent (2024) "An effective matheuristic approach for solving the electric traveling salesperson problem with time windows and battery degradation", Engineering Applications of Artificial Intelligence, Vol.132 (SCI)
    Naderi, Siamak and Daşcı, Abdullah and Kılıç, Kemal (2024) "Joint transshipment, markdown, and clearance decisions at a fast-fashion retailer". Published Online First https://dx.doi.org/10.1080/00207543.2024.2365358
    Fallah, Ali and Saleem, Qandeel and Koç, Bahattin (2024) "Assessment of mechanical properties and shape memory behavior of 4D printed continuous fiber-reinforced PETG composites", Composites Part A: Applied Science and Manufacturing, Vol.181 (SCI)
    Daskalakis, Evangelos and Huang, Boyang and Hassan, Mohamed H. and Omar, Abdalla M. and Vyas, Cian and Acar, Anıl Ahmet and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo (2024) "In vitro evaluation of pore size graded bone scaffolds with different material composition", 3D Printing and Additive Manufacturing, Vol.11, No.2, E718-E730 (SCI)
    Bouhouras, Aggelos S. and Kelepouris, Nikolaos S. and Koltsaklis, Nikolaos and Oureilidis, Konstantinos and Christoforidis, Georgios C. (2024) "Congestion management in coupled TSO and DSO networks", Electric Power Systems Research, Vol.229 (SCI)
    Ahmed, Faran and Kılıç, Kemal (2024) "Does fuzzification of pairwise comparisons in analytic hierarchy process add any value?", Soft Computing, Vol.28, 4267-4284 (SCI)
    Ebrahimi Araghizad, Arash and Pashmforoush, Farzad and Tehranizadeh, Faraz and Kılıç, Kemal and Budak, Erhan (2024) "Improving milling force predictions: a hybrid approach integrating physics-based simulation and machine learning for remarkable accuracy across diverse unseen materials and tool types", Journal of Manufacturing Processes, Vol.114, 92-107 (SCI)
    Ozalp, A. and Okuyucu, C. and Koç, Bahattin and El-Atwani, O. and Aydogan, E. (2024) "Development and directed energy deposition of high strength Hf5Mo15Nb35Ta25Ti20 refractory high entropy alloys", Materials Characterization, Vol.209 (SCI)
    Javidrad, Hamidreza and Koç, Bahattin and Bayraktar, Hakan and Simsek, Ugur and Gunaydin, Kadir (2024) "Fatigue performance of metal additive manufacturing: a comprehensive overview", Virtual and Physical Prototyping, Vol.19, No.1 (SCI)
    Zenginis, Ioannis and Vardakas, John and Koltsaklis, Nikolaos and Verikoukis, Christos (2024) "Real-time energy scheduling applying the twin delayed deep deterministic policy gradient and data clustering", IEEE Systems Journal, Vol.18, No.1, 51-60 (SCI)
    Arlı, Cihan and Atılgan, Ali Rana and Mısırlıoğlu, Burç (2024) "Extended contributions to the pyroelectric effect in ferroelectric thin films", Applied Physics Letters, Vol.124, No.6 (SCI)
    Sheikhi, Mohammad and Rafiei Anamagh, Mirmeysam and Bediz, Bekir and Tunç, Lütfi Taner (2024) "Design of manufacturable variable stiffness composite laminates using spectral Chebyshev and normalized cut segmentation methods", Composite Structures, Vol.330 (SCI)
    Okumuşoğlu, Bahar Cennet and Basciftci, Beste and Kocuk, Burak (2024) "An integrated predictive maintenance and operations scheduling framework for power systems under failure uncertainty". Published Online First http://dx.doi.org/10.1287/ijoc.2022.0154
    Aksoy, Ozan and Yıldırım, Sinan (2024) "A model of dynamic flows: explaining Turkey's interprovincial migration", Sociological Methodology, Vol.54, No.1, 52-91 (SSCI)
    Yıldırım, Sinan (2024) "Differentially private online Bayesian estimation with adaptive truncation", Turkish Journal of Electrical Engineering and Computer Sciences, Vol.32, No.1, 34-50 (SCI)
    Isik, Murat and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Yıldız, Mehmet and Aydoğan, Eda and Koç, Bahattin (2024) "The effect of additively and subtractively created center internal features on microstructure and mechanical performance of inconel-718 parts", Rapid Prototyping Journal, Vol.30, No.2, 287-304 (SCI)
    Jamshidi, Hamid and Budak, Erhan (2024) "A digital twin-based framework for selection of grinding conditions towards improved productivity and part quality", Journal of Intelligent Manufacturing, Vol.35, No.1, 161-173 (SCI)
    Taşpınar, Rabia and Kocuk, Burak (2024) "Discretization-based solution approaches for the circle packing problem". Published Online First https://dx.doi.org/10.1080/0305215X.2023.2301575
    Acar, Anıl Ahmet and Daskalakis, Evangelos and Bartolo, Paulo and Weightman, Andrew and Cooper, Glen and Blunn, Gordon and Koç, Bahattin (2024) "Customized scaffolds for large bone defects using 3D-printed modular blocks from 2D-medical images", Bio-Design and Manufacturing, Vol.7, No.1, 74-87 (SCI)
    Ahmed, Faran and Kılıç, Kemal (2023) "A basic algorithm for generating an individualized numerical scale[Formula presented]", Expert Systems with Applications, Vol.233 (SCI)
    Ebrahimi Araghizad, Arash and Tehranizadeh, Faraz and Kılıç, Kemal and Budak, Erhan (2023) "Smart tool-related faults monitoring system using process simulation-based machine learning algorithms", Journal of Machine Engineering, Vol.23, No.4, 18-32 (NA)
    Işık, Murat and Yıldız, Mehmet and Seçer, Ragıp Orkun and Sen, Ceren and Bilgin, Guney Mert and Orhangul, Akin and Akbulut, Guray and Javidrad, Hamidreza and Koç, Bahattin (2023) "Fabrication of electron beam melted titanium aluminide: the effects of machining parameters and heat treatment on surface roughness and hardness", Metals, Vol.13, No.12 (SCI)
    Bagherzadeh, Amin and Budak, Erhan and Ozlu, Emre and Koç, Bahattin (2023) "Machining behavior of Inconel 718 in hybrid additive and subtractive manufacturing", CIRP Journal of Manufacturing Science and Technology, Vol.46, 178-190 (SCI)
    Çatay, Bülent and Sadati, İhsan (2023) "An improved matheuristic for solving the electric vehicle routing problem with time windows and synchronized mobile charging/battery swapping", Computers and Operations Research, Vol.159 (SCI)
    Zarrabi, Ali and Perrin, David and Kavoosi, Mahboubeh and Sommer, Micah and Sezen, Serap and Mehrbod, Parvaneh and Bhushan, Bhavya and Machaj, Filip and Rosik, Jakub and Kawalec, Philip and Afifi, Saba and Bolandi, Seyed Mohammadreza and Koleini, Peiman and Taheri, Mohsen and Madrakian, Tayyebeh and Łos, Marek J. and Lindsey, Benjamin and Çakır, Nilüfer and Zarepour, Atefeh and Hushmandi, Kiavash and Fallah, Ali and Koç, Bahattin and Khosravi, Arezoo and Ahmadi, Mazaher and Logue, Susan and Orive, Gorka and Pecic, Stevan and Gordon, Joseph W. and Ghavami, Saeid (2023) "Rhabdomyosarcoma: current therapy, challenges, and future approaches to treatment strategies", Cancers, Vol.15, No.21 (SCI)
    Moradi, Nima and Sadati, İhsan and Çatay, Bülent (2023) "Last mile delivery routing problem using autonomous electric vehicles", Computers and Industrial Engineering, Vol.184 (SCI)
    Koca, Esra and Koksalan, G. Irmak (2023) "Capacitated lot sizing problem with periodic carbon emission constraints and multiple resources", International Journal of Production Research, Vol.61, No.19, 6589-6601 (SCI)
    Çelik, Dilara and Karaca, Ali and Koç, Bahattin (2023) "Directed energy deposition of parts with internal channels using removable graphite supports". Published Online First https://dx.doi.org/10.1089/3dp.2023.0057
    Koca, Esra (2023) "Two-stage stochastic facility location problem with disruptions and restricted shortages", Computers and Industrial Engineering, Vol.183 (SCI)
    Akbari, Vahid and Sadati, İhsan and Salman, F. Sibel and Shiri, Davood (2023) "Minimizing total weighted latency in home healthcare routing and scheduling with patient prioritization", OR Spectrum, Vol.45, No.3, 807-852 (SCI)
    Bilici, Çiğdem and Altunbek, Mine and Afghah, Ferdows and Tatar, Asena Gülenay and Koç, Bahattin (2023) "Embedded 3D printing of cryogel-based scaffolds", ACS Biomaterials Science and Engineering, Vol.9, No.8, 5028-5038 (SCI)
    Çetin, Ebru and Güçlü, Tandaç Fürkan and Kantarcıoğlu, Işık and Gaszek, Ilona K. and Toprak, Erdal and Atılgan, Ali Rana and Dedeoglu, Burcu and Atılgan, Canan (2023) "Kinetic barrier to enzyme inhibition is manipulated by dynamical local interactions in E. coli DHFR", Journal of Chemical Information and Modeling, Vol.63, No.15, 4839-4849 (SCI)
    Neshat, Najmeh and Kaya, Murat and Ghaboulian Zare, Sara (2023) "Exploratory policy analysis for electric vehicle adoption in European countries: a multi-agent-based modelling approach", Journal of Cleaner Production, Vol.414 (SCI)
    Uru, Cagin and Dayanik, Savas and Sezer, Semih Onur (2023) "Compound poisson disorder problem with uniformly distributed disorder time", Bernoulli, Vol.29, No.3, 2272-2294 (SCI)
    Rahimzadeh Berenji, Kaveh and Budak, Erhan (2023) "A general model for uncut chip geometry, process kinematics, and mechanics of orthogonal turn-milling process", CIRP Journal of Manufacturing Science and Technology, Vol.43, 57-70 (SCI)
    Fallah, Ali and Asif, Suleman and Gokcer, Gizem and Koç, Bahattin (2023) "4D printing of continuous fiber-reinforced electroactive smart composites by coaxial additive manufacturing", Composite Structures, Vol.316 (SCI)
    Asgharieh Ahari, Sahand and Kocuk, Burak (2023) "A mixed-integer exponential cone programming formulation for feature subset selection in logistic regression", EURO Journal on Computational Optimization, Vol.11 (ESCI)
    Tuncer, Deniz and Kocuk, Burak (2023) "An MISOCP-based decomposition approach for the unit commitment problem with AC power flows", IEEE Transactions on Power Systems, Vol.38, No.4, 3388-3400 (SCI)
    Şentürk, Efsun and Bilici, Çiğdem and Afghah, Ferdows and Khan, Zaeema and Çelik, Süleyman and Wu, Chengtie and Koç, Bahattin (2023) "3D bioprinting of tyramine modified hydrogels under visible light for osteochondral interface", Biofabrication, Vol.15, No.3 (SCI)
    Tunç, Lütfi Taner and Sheikhi, Mohammad (2023) "AFP tool path planning for manufacture of variable stiffness composites", CIRP Annals, Vol.72, No.1, 381-384 (SCI)
    Tavakol Aghaei, Vahid and Ağababaoğlu, Arda and Bawo, Biram and Naseradinmousavi, Peiman and Yıldırım, Sinan and Yeşilyurt, Serhat and Onat, Ahmet (2023) "Energy optimization of wind turbines via a neural control policy based on reinforcement learning Markov chain Monte Carlo algorithm", Applied Energy, Vol.341 (SCI)
    Yıldırım, Sinan and Khalafi, Mohammad and Güzel, Tayyar and Satık, Halil and Yılmaz, Murat (2023) "Supply curves in electricity markets: a framework for dynamic modeling and Monte Carlo forecasting", IEEE Transactions on Power Systems, Vol.38, No.4, 3056-3069 (SCI)
    Kayacık, Sezen Ece and Kocuk, Burak and Yüksel, Tuğçe (2023) "The promise of EV-aware multi-period optimal power flow problem: cost and emission benefits", Sustainable Energy, Grids and Networks, Vol.34 (SCI)
    Altunbek, Mine and Afghah, Seyedeh Ferdows and Fallah, Ali and Acar, Anıl Ahmet and Koç, Bahattin (2023) "Design and 3D printing of personalized hybrid and gradient structures for critical size bone defects", ACS Applied Bio Materials, Vol.6, No.5, 1873-1885 (ESCI)
    Weng, Jian and Saelzer, Jannis and Berger, Sebastian and Zhuang, Kejia and Bagherzadeh, Amin and Budak, Erhan and Biermann, Dirk (2023) "Analytical and experimental investigations of rake face temperature considering temperature-dependent thermal properties", Journal of Materials Processing Technology, Vol.314 (SCI)
    Rastani, Sina and Çatay, Bülent (2023) "A large neighborhood search-based matheuristic for the load-dependent electric vehicle routing problem with time windows", Annals of Operations Research, Vol.324, No.1-2, 761-793 (SCI)
    Altunbek, Mine and Afghah, Ferdows and Çalışkan, Özüm Şehnaz and Yoo, James J. and Koç, Bahattin (2023) "Design and bioprinting for tissue interfaces", Biofabrication, Vol.15, No.2 (SCI)
    Sadati, İhsan (2023) "Integrating a connected micromobility infrastructure to the existing public transport", Journal of Intelligent Transportation Systems and Applications, Vol.6, No.1, 184-193 (NA)
    Dayanık, Savaş and Sezer, Semih Onur (2023) "Model misspecification in discrete time Bayesian online change detection", Methodology and Computing in Applied Probability, Vol.25, No.1 (SCI)
    Liu, Gökşin and Ekmen, Erhan and Jalalypour, Farzaneh and Mertens, Haydyn D. T. and Jeffries, Cy M. and Svergun, Dmitri and Atılgan, Ali Rana and Atılgan, Canan and Sayers, Zehra (2023) "Conformational multiplicity of bacterial ferric binding protein revealed by small angle x-ray scattering and molecular dynamics calculations", Journal of Chemical Physics, Vol.158, No.8 (SCI)
    Daskalakis, Evangelos and Hassan, Mohamed H. and Omar, Abdalla M. and Acar, Anıl Ahmet and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo (2023) "Accelerated degradation of poly-ε-caprolactone composite scaffolds for large bone defects", Polymers, Vol.15, No.3 (SCI)
    Kendibilir, Abdullah and Polat, Mehmet Furkan and Çavuş, Ömer Safa and Khalilvandi Behrouzyar, Sina and Motlagh, Peyman Lahe and Koç, Bahattin and Kefal, Adnan (2023) "Combination of peridynamics and genetic algorithm based topology optimization methods for additive manufacturing-friendly designs", Journal of Additive Manufacturing Technologies, Vol.2, No.1 (NA)
    Yoğurtçuoğlu, Abdul Vahap and Şimşek, Uğur and Koç, Bahattin (2023) "Effects of design parameters on surface roughness of additively manufactured thin-walled structures", Journal of Additive Manufacturing Technologies, Vol.2, No.1 (NA)
    Dayanık, Savaş and Sezer, Semih Onur (2023) "Optimal dynamic multi-keyword bidding policy of an advertiser in search-based advertising", Mathematical Methods of Operations Research, Vol.97, No.1, 25-56 (SCI)
    Arlı, Cihan and Atılgan, Ali Rana and Mısırlıoğlu, Burç (2023) "Volumetric effects in electrocaloric response of ferroelectric thin films", Journal of Materials Chemistry C, Vol.11, No.3, 1134-1143 (SCI)
    Schmitz, Tony and Betters, Emma and Budak, Erhan and Yüksel, Esra and Park, Simon and Altıntaş, Yusuf (2023) "Review and status of tool tip frequency response function prediction using receptance coupling", Precision Engineering, Vol.79, 60-77 (SCI)
    Çetin, Ebru and Atılgan, Ali Rana and Atılgan, Canan (2022) "DHFR mutants modulate their synchronized dynamics with the substrate by shifting hydrogen bond occupancies", Journal of Chemical Information and Modeling, Vol.62, No.24, 6715-6726 (SCI)
    Karabulut Türkseven, Ezgi and Gholizadeh, Fatemeh and Akhavan, Raha (2022) "The value of adaptive menu sizes in peer-to-peer platforms", Transportation Research Part C: Emerging Technologies, Vol.145 (SCI)
    Kendibilir, Abdullah and Kefal, Adnan and Sohouli, A. and Yıldız, Mehmet and Koç, Bahattin and Suleman, A. (2022) "Peridynamics topology optimization of three-dimensional structures with surface cracks for additive manufacturing", Computer Methods in Applied Mechanics and Engineering, Vol.401, No.Part B (SCI)
    Kanavetas, Odysseas and Balcıoğlu, Barış (2022) "The "Sensitive" Markovian queueing system and its application for a call center problem", Annals of Operations Research, Vol.317, No.2, 651-664 (SCI)
    Sahba, Pedram and Balcıoğlu, Barış and Banjevic, Dragan (2022) "The impact of disruption characteristics on the performance of a server", Annals of Operations Research, Vol.317, No.1, 239-252 (SCI)
    Seyfi, Majid and Alinaghian, Mahdi and Ghorbani, Erfan and Çatay, Bülent and Saeid Sabbagh, Mohammad (2022) "Multi-mode hybrid electric vehicle routing problem", Transportation Research Part E: Logistics and Transportation Review, Vol.166 (SCI, SSCI)
    Fallah, Ali and Altunbek, Mine and Bartolo, Paulo and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin (2022) "3D printed scaffold design for bone defects with improved mechanical and biological properties", Journal of the Mechanical Behavior of Biomedical Materials, Vol.134 (SCI)
    Alparslan, Barış and Yıldırım, Sinan (2022) "Statistic selection and MCMC for differentially private Bayesian estimation", Statistics and Computing, Vol.32, No.5 (SCI)
    Duman, Ece Naz and Taş, Duygu and Çatay, Bülent (2022) "Branch-and-price-and-cut methods for the electric vehicle routing problem with time windows", International Journal of Production Research, Vol.60, No.17, 5332-5353 (SCI)
    Budak, Erhan and Matsubara, Atsushi and Donmez, Alkan and Munoa, Jokin (2022) "Mechanical interfaces in machine tools", CIRP Annals, Vol.71, No.2, 647-670 (SCI)
    Bartolo, Paulo and Malshe, Ajay and Ferraris, Eleonora and Koç, Bahattin (2022) "3D bioprinting: materials, processes, and applications", CIRP Annals, Vol.71, No.2, 577-597 (SCI)
    Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Yıldız, Saltuk and Budak, Erhan (2022) "Chatter stability of thin-walled part machining using special end mills", CIRP Annals, Vol.71, No.1, 365-368 (SCI)
    Hesam Sadati, Mir Ehsan and Akbari, Vahid and Çatay, Bülent (2022) "Electric vehicle routing problem with flexible deliveries", International Journal of Production Research (SI), Vol.60, No.13, 4268-4294 (SCI)
    Bagherzadeh, Amin and Koç, Bahattin and Budak, Erhan and Işık, Murat (2022) "High-speed machining of additively manufactured Inconel 718 using hybrid cryogenic cooling methods", Virtual and Physical Prototyping, Vol.17, No.3, 419-436 (SCI)
    Balcıoğlu, Barış and Varol, Yağız (2022) "Fair and profitable: how pricing and lead-time quotation policies can help", European Journal of Operational Research, Vol.299, No.3, 977-986 (SCI, SSCI)
    Rahimzadeh Berenji, Kaveh and Budak, Erhan (2022) "Improved machining performance through turn-milling", Journal of Machine Engineering, Vol.22, No.2, 5-17 (NA)
    Maleki-Ghaleh, H. and Shakeri, M. S. and Dargahi, Z. and Kavanlouei, M. and Kaveh Garabagh, H. and Moradpur-Tari, E. and Yourdkhani, A. and Fallah, Ali and Zarrabi, A. and Koç, Bahattin and Siadati, M. H. (2022) "Characterization and optical properties of mechanochemically synthesized molybdenum-doped rutile nanoparticles and their electronic structure studies by density functional theory", Materials Today Chemistry, Vol.24 (SCI)
    Afghah, Seyedeh Ferdows and Iyison, Necla Birgul and Nadernezhad, Ali and Midi, Ahmet and Sen, Ozlem and Saner Okan, Burcu and Çulha, Mustafa and Koç, Bahattin (2022) "3D fiber reinforced hydrogel scaffolds by melt electrowriting and gel casting as a hybrid design for wound healing", Advanced Healthcare Materials, Vol.11, No.11 (SCI)
    Tavakol Aghaei, Vahid and Ağababaoğlu, Arda and Yıldırım, Sinan and Onat, Ahmet (2022) "A real-world application of Markov chain Monte Carlo method for Bayesian trajectory control of a robotic manipulator", ISA Transactions, Vol.125, 580-590 (SCI)
    Iglesias, Alexander and Tunç, Lütfi Taner and Özsahin, Orkun and Franco, Oier and Munoa, Jokin and Budak, Erhan (2022) "Alternative experimental methods for machine tool dynamics identification: a review", Mechanical Systems and Signal Processing, Vol.170 (SCI)
    Bilgili, Deniz and Budak, Erhan and Altintas, Yusuf (2022) "Multibody dynamic modeling of five-axis machine tools with improved efficiency", Mechanical Systems and Signal Processing, Vol.171 (SCI)
    Kocuk, Burak (2022) "Optimization problems involving matrix multiplication with applications in materials science and biology", Engineering Optimization, Vol.54, No.5, 786-804 (SCI)
    Kuru, Nurdan and Birbil, Ş. İlker and Gürbüzbalaban, Mert and Yıldırım, Sinan (2022) "Differentially private accelerated optimization algorithms", SIAM Journal on Optimization, Vol.32, No.2, 795-821 (SCI)
    Bilici, Çiğdem and Tatar, Asena Gülenay and Şentürk, Efsun and Dikyol, Caner and Koç, Bahattin (2022) "Bisulfite-initiated crosslinking of gelatin methacryloyl hydrogels for embedded 3D bioprinting", Biofabrication, Vol.14, No.2 (SCI)
    Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner and Gönül, Bora (2022) "Development of a vision based pose estimation system for robotic machining and improving its accuracy using LSTM neural networks and sparse regression", Robotics and Computer Integrated Manufacturing, Vol.74 (SCI)
    Balcıoğlu, Barış and Kanavetas, Odysseas (2022) "A dynamic prioritization policy for the callback option in a call center", Flexible Services and Manufacturing Journal, Vol.34, No.1, 40-64 (SCI)
    Daskalakis, Evangelos and Huang, Boyang and Vyas, Cian and Acar, Anıl Ahmet and Liu, Fengyuan and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo (2022) "Bone bricks: the effect of architecture and material composition on the mechanical and biological performance of bone scaffolds", ACS Omega, Vol.7, No.9, 7515-7530 (SCI)
    Aydogan, E. and El-Atwani, O. and Erdem, B. and Chen, W. Y. and Li, M. and Devaraj, A. and Koç, Bahattin and Maloy, S. A. (2022) "In-situ radiation response of additively manufactured modified Inconel 718 alloys", Additive Manufacturing, Vol.51 (SCI)
    Atılgan, Ali Rana and Atılgan, Canan (2022) "Computational strategies for protein conformational ensemble detection", Current Opinion in Structural Biology, Vol.72, 79-87 (SCI)
    Burak Okan, Osman and Turgut, Deniz and Atılgan, Canan and Atılgan, Ali Rana and Ozisik, Rahmi (2022) "Could network structures generated with simple rules imposed on a cubic lattice reproduce the structural descriptors of globular proteins?", Journal of Complex Networks, Vol.10, No.1 (SCI)
    Yıldırım, Umman Mahir and Çatay, Bülent (2022) "An enhanced network-consistent travel speed generation scheme on time-dependent shortest path and routing problems", IEEE Transactions on Intelligent Transportation Systems, Vol.23, No.2, 873-884 (SCI)
    Daskalakis, Evangelos and Huang, Boyang and Vyas, Cian and Acar, Anıl Ahmet and Fallah, Ali and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon and Bartolo, Paulo (2022) "Novel 3D bioglass scaffolds for bone tissue regeneration", Polymers, Vol.14, No.3 (SCI)
    Abdennebi, Anes and Elakaş, Anıl and Taşyaran, Fatih and Öztürk, Erdinç and Kaya, Kamer and Yıldırım, Sinan (2022) "Machine learning-based load distribution and balancing in heterogeneous database management systems", Concurrency and Computation: Practice and Experience, Vol.34, No.4 (SCI)
    Dey, Santanu S. and Kocuk, Burak and Redder, Nicole (2022) "Node-based valid inequalities for the optimal transmission switching problem", Discrete Optimization, Vol.43 (SCI)
    Papila, Melih and Atılgan, Ali Rana (2022) "All-composite honeycomb core sandwich structures: master curves for stiffness-based design", Forces in Mechanics, Vol.6 (NA)
    Balanji, Hamid Majidi and Turgut, Ali Emre and Tunç, Lütfi Taner (2022) "A novel vision-based calibration framework for industrial robotic manipulators", Robotics and Computer Integrated Manufacturing, Vol.73 (SCI)
    Dikyol, Caner and Altunbek, Mine and Bartolo, Paulo and Koç, Bahattin (2021) "Multimaterial bioprinting approaches and their implementations for vascular and vascularized tissues", Bioprinting, Vol.24 (NA)
    Manna, Madhu Sudan and Tamer, Yusuf Talha and Gaszek, Ilona and Poulides, Nicole and Ahmed, Ayesha and Wang, Xiaoyu and Toprak, Furkan C.R. and Woodard, Da Nae R. and Koh, Andrew Y. and Williams, Noelle S. and Borek, Dominika and Atılgan, Ali Rana and Hulleman, John D. and Atılgan, Canan and Tambar, Uttam and Toprak, Erdal (2021) "A trimethoprim derivative impedes antibiotic resistance evolution", Nature Communications, Vol.12, No.1 (SCI)
    Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Budak, Erhan (2021) "Dynamics and chatter stability of crest-cut end mills", International Journal of Machine Tools and Manufacture, Vol.171 (SCI)
    Maleki-Ghaleh, Hossein and Hossein Siadati, M. and Fallah, Ali and Zarrabi, Ali and Afghah, Seyedeh Ferdows and Koç, Bahattin and Dalir Abdolahinia, Elaheh and Omidi, Yadollah and Barar, Jaleh and Akbari-Fakhrabadi, Ali and Beygi-Khosrowshahi, Younes and Adibkia, Khosro (2021) "Effect of zinc-doped hydroxyapatite/graphene nanocomposite on the physicochemical properties and osteogenesis differentiation of 3D-printed polycaprolactone scaffolds for bone tissue engineering", Chemical Engineering Journal, Vol.426 (SCI)
    Hanay, Saltuk and Fallah, Ali and Şentürk, Efsun and Yetim, Zeliha and Afghah, Seyedeh Ferdows and Yılmaz, Hülya and Çulha, Mustafa and Koç, Bahattin and Zarrabi, Ali and Varma, Rajender S. (2021) "Exploiting urazole's acidity for fabrication of hydrogels and ion-exchange materials", Gels, Vol.7, No.4 (SCI)
    Koca, Esra and Noyan, Nilay and Yaman, Hande (2021) "Two-stage facility location problems with restricted recourse", IISE Transactions, Vol.53, No.12, 1369-1381 (SCI)
    Balkan, Muhammed Enes and Aydoğan, Eda and Işık, Murat and Derin, Bora and Koç, Bahattin (2021) "Directed energy deposition process development for functionally gradient Copper-Inconel 718 materials", Journal of Additive Manufacturing Technologies, Vol.1, No.3 (NA)
    Lahe Mothlag, Peyman and Kendibilir, Abdullah and Koç, Bahattin and Kefal, Adnan (2021) "Peridynamics-informed effect of micro-cracks on topology optimization of lightweight structures", Journal of Additive Manufacturing Technologies, Vol.1, No.3 (NA)
    Işık, Murat and Kısa, Erdal and Koç, Bahattin and Yıldız, Mehmet and Pehlivanoğulları, Barış and Orhangül, Akın and Akbulut, Güray (2021) "Topology optimization and manufacturing of engine bracket using electron beam melting", Journal of Additive Manufacturing Technologies, Vol.1, No.3 (NA)
    Poyraz, Özgür and Yasa, Evren and Tunç, Lütfi Taner and Kilicay, Koray (2021) "Parametric simulations for residual stresses and distortions of Inconel 625 fabricated by laser powder bed fusion additive manufacturing", Journal of Additive Manufacturing Technologies, Vol.1, No.2 (NA)
    Rezaei, Hamed and Sadeghi, Mohammad Hossein and Budak, Erhan (2021) "Correction to: Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V (The International Journal of Advanced Manufacturing Technology, (2018), 95, 5-8, (1617-1634), 10.1007/s00170-017-1329-3)", International Journal of Advanced Manufacturing Technology, Vol.117, No.1-2, 689-690 (SCI)
    Karabulut Türkseven, Ezgi and Ahmed, Shabbir and Nemhauser, George (2021) "Decentralized online integer programming problems with a coupling cardinality constraint", Computers and Operations Research, Vol.135 (SCI)
    Dikyol, Caner and Altunbek, Mine and Koç, Bahattin (2021) "Embedded multimaterial bioprinting platform for biofabrication of biomimetic vascular structures", Journal of Materials Research (SI), Vol.36, No.19, 3851-3864 (SCI)
    Piluso, Susanna and Akdeniz Skvortsov, Gözde and Altunbek, Mine and Afghah, Seyedeh Ferdows and Khani, Navid and Koç, Bahattin and Patterson, Jennifer (2021) "3D Bioprinting of molecularly engineered PEG-based hydrogels utilizing gelatin fragments", Biofabrication, Vol.13, No.4 (SCI)
    Özbaygın, Gizem and Koca, Esra and Yaman, Hande (2021) "An exact solution approach for the inventory routing problem with time windows", Computers and Operations Research, Vol.134 (SCI, SSCI)
    Maleki-Ghaleh, H. and Siadati, M. H. and Fallah, Ali and Koç, Bahattin and Kavanlouei, M. and Khademi-Azandehi, P. and Moradpur-Tari, E. and Omidi, Y. and Barar, J. and Beygi-Khosrowshahi, Y. and Kumar, Alan P. and Adibkia, Kh (2021) "Antibacterial and cellular behaviors of novel zinc-doped hydroxyapatite/graphene nanocomposite for bone tissue engineering", International Journal of Molecular Sciences, Vol.22, No.17 (SCI)
    Jamshidi, Hamid and Budak, Erhan (2021) "A 3D analytical thermal model in grinding considering a periodic heat source under dry and wet conditions", Journal of Materials Processing Technology, Vol.295 (SCI)
    Hesam Sadati, Mir Ehsan and Çatay, Bülent and Aksen, Deniz (2021) "An efficient variable neighborhood search with tabu shaking for a class of multi-depot vehicle routing problems", Computers and Operations Research, Vol.133 (SCI, SSCI)
    Tanoumand, Neda and Ünlüyurt, Tonguç (2021) "An exact algorithm for the resource constrained home health care vehicle routing problem", Annals of Operations Research, Vol.304, No.1-2, 397-425 (SCI, SSCI)
    Jamshidi, Hamid and Budak, Erhan (2021) "On the prediction of surface burn and its thickness in grinding processes", CIRP Annals, Vol.70, No.1, 285-288 (SCI)
    Yüksel, Esra and Budak, Erhan and Özlü, Emre and Oral, Ahmet and İğrek, Fatih and Tosun, Fulya (2021) "Prediction of thermal growth in a high-speed spindle by considering thermo-mechanical behavior", MM Science Journal, Vol.2021, 4526-4533 (ESCI)
    Tunç, Lütfi Taner and Gönül, Bora (2021) "Effect of quasi-static motion on the dynamics and stability of robotic milling", CIRP Annals, Vol.70, No.1, 305-308 (SCI)
    Akbari, Vahid and Sadatizamanabad, Mirehsan Hesam and Kian, Ramez (2021) "A decomposition-based heuristic for a multicrew coordinated road restoration problem", Transportation Research Part D: Transport and Environment, Vol.95 (SCI, SSCI)
    Özcan, Yiğit and Tunç, Lütfi Taner and Kopacka, Jan and Çetin, Beril and Sulitka, Matej (2021) "Modelling and simulation of controlled depth abrasive water jet machining (AWJM) for roughing passes of free-form surfaces", International Journal of Advanced Manufacturing Technology, Vol.114, No.11-12, 3581-3596 (SCI)
    Sadatizamanabad, Mirehsan Hesam and Çatay, Bülent (2021) "A hybrid variable neighborhood search approach for the multi-depot green vehicle routing problem", Transportation Research Part E: Logistics and Transportation Review, Vol.149 (SCI, SSCI)
    Kocuk, Burak (2021) "Rational polyhedral outer-approximations of the second-order cone", Discrete Optimization, Vol.40 (SCI)
    Wu, Zhongcao and Zhuang, Hui and Ma, Bing and Xiao, Yin and Koç, Bahattin and Zhu, Yufang and Wu, Chengtie (2021) "Manganese-doped calcium silicate nanowire composite hydrogels for melanoma treatment and wound healing", Research, Vol.2021 (SCI)
    Kocuk, Burak (2021) "Conic reformulations for Kullback-Leibler divergence constrained distributionally robust optimization and applications", International Journal of Optimization and Control: Theories and Applications, Vol.11, No.2, 139-151 (NA)
    Yıldırım, Sinan and Kurutmaz, M. Burak and Barsbey, Melih and Şimşekli, Umut and Cemgil, A. Taylan (2021) "Bayesian allocation model: marginal likelihood-based model selection for count tensors", IEEE Journal of Selected Topics in Signal Processing, Vol.15, No.3, 560-573 (SCI)
    Güçlü, Tandaç Fürkan and Atılgan, Ali Rana and Atılgan, Canan (2021) "Dynamic community composition unravels allosteric communication in pdz3", Journal of Physical Chemistry B, Vol.125, No.9, 2266-2276 (SCI)
    Bagherzadeh, Amin and Kuram, Emel and Budak, Erhan (2021) "Experimental evaluation of eco-friendly hybrid cooling methods in slot milling of titanium alloy", Journal of Cleaner Production, Vol.289 (SCI)
    Koca, Esra (2021) "Stochastic lot sizing problem with carbon emission constraints", Gazi University Journal of Science, Vol.34, No.1, 148-160 (ESCI)
    Daskalakis, Evangelos and Liu, Fengyuan and Huang, Boyang and Acar, Anıl Ahmet and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Koç, Bahattin and Bartolo, Paulo (2021) "Investigating the influence of architecture and material composition of 3D printed anatomical design scaffolds for large bone defects", International Journal of Bioprinting, Vol.7, No.2 (SCI)
    Güçlü, Tandaç Fürkan and Kocatuğ, Nazlı and Atılgan, Ali Rana and Atılgan, Canan (2021) "N-terminus of the third PDZ domain of PSD-95 orchestrates allosteric communication for selective ligand binding", Journal of Chemical Information and Modeling, Vol.61, No.1, 347-357 (SCI)
    Keskin Özel, Merve and Çatay, Bülent and Laporte, Gilbert (2021) "A simulation-based heuristic for the electric vehicle routing problem with time windows and stochastic waiting times at recharging stations", Computers and Operations Research, Vol.125 (SCI, SSCI)
    Kayacık, Sezen Ece and Kocuk, Burak (2021) "An MISOCP-based solution approach to the reactive optimal power flow problem", IEEE Transactions on Power Systems, Vol.36, No.1, 529-532 (SCI)
    Altintas, Yusuf and Stepan, Gabor and Budak, Erhan and Schmitz, Tony and Kilic, Zekai Murat (2020) "Chatter stability of machining operations", Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol.142, No.11 (SCI)
    Karabulut Türkseven, Ezgi and Ahmed, Shabbir and Nemhauser, George (2020) "Decentralized algorithms for distributed integer programming problems with a coupling cardinality constraint", Discrete Optimization, Vol.38 (SCI)
    Sadatizamanabad, Mirehsan Hesam and Aksen, Deniz and Aras, Necati (2020) "A trilevel r-interdiction selective multi-depot vehicle routing problem with depot protection", Computers and Operations Research, Vol.123 (SCI, SSCI)
    Davarnia, Danial and Kocuk, Burak and Cornuéjols, Gerard (2020) "Computational aspects of Bayesian solution estimators in stochastic optimization", INFORMS Journal on Optimization, Vol.2, No.4, 256-272 (NA)
    Jamshidi, Hamid and Budak, Erhan (2020) "An analytical grinding force model based on individual grit interaction", Journal of Materials Processing Technology, Vol.283 (SCI)
    Naderi, Siamak and Kılıç, Kemal and Daşcı, Abdullah (2020) "A deterministic model for the transshipment problem of a fast fashion retailer under capacity constraints", International Journal of Production Economics, Vol.227 (SCI, SSCI)
    Küçüksayacıgil, Fikri and Ulusoy, Gündüz (2020) "Hybrid genetic algorithm for bi-objective resource-constrained project scheduling", Frontiers of Engineering Management, Vol.7, No.3, 426-446 (ESCI)
    Abdizadeh, Haleh and Jalalypour, Farzaneh and Atılgan, Ali Rana and Atılgan, Canan (2020) "A coarse-grained methodology identifies intrinsic mechanisms that dissociate interacting protein pairs", Frontiers in Molecular Biosciences, Vol.7 (SCI)
    Yüksel, Esra and Ertürk, Ahmet Semih and Budak, Erhan (2020) "A hybrid contact implementation framework for finite element analysis and topology optimization of machine tools", Journal of Manufacturing Science and Engineering, Vol.142, No.8 (SCI)
    Özlü, Emre and Ebrahimi Araghizad, Arash and Budak, Erhan (2020) "Broaching tool design through force modelling and process simulation", CIRP Annals - Manufacturing Technology, Vol.69, No.1, 53-56 (SCI)
    Dey, Santanu S. and Kocuk, Burak and Santana, Asteroide (2020) "Convexifications of rank-one-based substructures in QCQPs and applications to the pooling problem", Journal of Global Optimization, Vol.77, No.2, 227-272 (SCI)
    Bilal, Diyar Khalis and Ünel, Mustafa and Yıldız, Mehmet and Koç, Bahattin (2020) "Realtime localization and estimation of loads on aircraft wings from depth images", Sensors, Vol.20, No.12 (SCI)
    Hazır, Öncü and Ulusoy, Gündüz (2020) "A classification and review of approaches and methods for modeling uncertainty in projects", International Journal of Production Economics, Vol.223 (SCI, SSCI)
    Araghi, Mojtaba and Balcıoğlu, Barış (2020) "Using discrete event simulation to fit probability distributions for autocorrelated service times", INFOR: Information Systems and Operational Research, Vol.58, No.1, 124-140 (SCI)
    Kocuk, Burak and Cornuéjols, Gérard (2020) "Incorporating Black-Litterman views in portfolio construction when stock returns are a mixture of normals", Omega - International Journal of Management Science, Vol.91 (SCI, SSCI)
    Afghah, Seyedeh Ferdows and Altunbek, Mine and Dikyol, Caner and Koç, Bahattin (2020) "Preparation and characterization of nanoclay-hydrogel composite support-bath for bioprinting of complex structures", Scientific Reports, Vol.10, No.1 (SCI)
    Afghah, Seyedeh Ferdows and Ullah, Mohib and Zanjani, Jamal Seyyed Monfared and Süt, Pınar Akkuş and Şen, Özlem and Emanet, Melis and Saner Okan, Burcu and Çulha, Mustafa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Koç, Bahattin (2020) "3D printing of silver-doped polycaprolactone-poly(propylene succinate) composite scaffolds for skin tissue engineering", Biomedical Materials, Vol.15, No.3 (SCI)
    Goharibajestani, Zahra and Akhlaghi Baghoojari, Omid and Akaoğlu, Can and Afghah, Ferdows and Khani, Navid and Hodaei, Amin and Koç, Bahattin and Akbulut, Özge (2019) "Incorporating steric hindrance into the additive design enables a robust formulation of alumina ink for extrusion-based 3D printing", ACS Applied Polymer Materials, Vol.1, No.12, 3279-3285 (SCI)
    Frenk, Hans and Javadi Khatab, Sonya and Sezer, Semih Onur (2019) "An optimal stopping approach for the end-of-life inventory problem", Mathematical Methods of Operations Research, Vol.90, No.3, 329-363 (SCI, SSCI)
    Frenk, Hans and Pehlivan, Canan and Sezer, Semih Onur (2019) "Order and exit decisions under non-increasing price curves for products with short life cycles", Mathematical Methods of Operations Research, Vol.90, No.3, 365-397 (SCI, SSCI)
    Yavuz, Tonguc and Kundakcioglu, O. Erhun and Ünlüyurt, Tonguç (2019) "Exact and heuristic approaches to detect failures in failed k-out-of-n systems", Computers and Operations Research, Vol.112 (SCI)
    Jamshidi, Hamid and Gürtan, Mert and Budak, Erhan (2019) "Identification of active number of grits and its effects on mechanics and dynamics of abrasive processes", Journal of Materials Processing Technology, Vol.273 (SCI)
    Erdil, Ertunç and Yıldırım, Sinan and Tasdizen, Tolga and Çetin, Müjdat (2019) "Pseudo-marginal MCMC sampling for image segmentation using nonparametric shape priors", IEEE Transactions on Image Processing, Vol.28, No.11, 5702-5715 (SCI)
    Afghah, Ferdows and Dikyol, Caner and Altunbek, Mine and Koç, Bahattin (2019) "Biomimicry in bio-manufacturing: developments in melt electrospinning writing technology towards hybrid biomanufacturing", Applied Sciences (Switzerland), Vol.9, No.17 (SCI)
    Tehranizadeh, Faraz and Koca, Recep and Budak, Erhan (2019) "Investigating effects of serration geometry on milling forces and chatter stability for their optimal selection", International Journal of Machine Tools and Manufacture, Vol.144 (SCI)
    Kocuk, Burak and Moran, Diego A. (2019) "On subadditive duality for conic mixed-integer programs", SIAM Journal on Optimization, Vol.29, No.3, 2320-2336 (SCI)
    Yıldırım, Sinan and Ermiş, Beyza (2019) "Exact MCMC with differentially private moves: revisiting the penalty algorithm in a data privacy framework", Statistics and Computing, Vol.29, No.5, 947-963 (SCI)
    Rastani, Sina and Yüksel, Tuğçe and Çatay, Bülent (2019) "Effects of ambient temperature on the route planning of electric freight vehicles", Transportation Research Part D: Transport and Environment, Vol.74, 124-141 (SCI, SSCI)
    Verl, Alexander and Valente, Anna and Melkote, Shreyes and Brecher, Christian and Ozturk, E. and Tunç, Lütfi Taner (2019) "Robots in machining", CIRP Annals, Vol.68, No.2, 799-822 (SCI)
    Tamer, Yusuf Talha and Gazsek, Ilona K. and Abdizadeh, Haleh and Batur, Tuğçe and Reynolds, Kimberly and Atılgan, Ali Rana and Atılgan, Canan and Toprak, Erdal (2019) "High-order epistasis in catalytic power of dihydrofolate reductase gives rise to a rugged fitness landscape in the presence of trimethoprim selection", Molecular Biology and Evolution, Vol.36, No.7, 1533-1550 (SCI)
    Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan (2019) "Effects of turn-milling conditions on chip formation and surface finish", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 113-116 (SCI)
    Keskin Özel, Merve and Laporte, Gilbert and Çatay, Bülent (2019) "Electric vehicle routing problem with time-dependent waiting times at recharging stations", Computers and Operations Research, Vol.107, 77-94 (SCI, SSCI)
    Nadernezhad, Ali and Ünal, Serkan and Khani, Navid and Koç, Bahattin (2019) "Material extrusion-based additive manufacturing of structurally controlled poly(lactic acid)/carbon nanotube nanocomposites", International Journal of Advanced Manufacturing Technology (SI), Vol.102, No.5-8, 2119-2132 (SCI)
    Tunç, Lütfi Taner (2019) "Effect of MQL conditions on milling of AISI 316L type stainless steeels [AISI 316L tipi paslanmaz çeliklerin frezelemesinde MQL şartlarının takım ömrüne etkisi]", Journal of the Faculty of Engineering and Architecture of Gazi University, Vol.34, No.4, 1665-1677 (SCI)
    Beşikci, Umut and Bilge, Ümit and Ulusoy, Gündüz (2019) "Resource portfolio problem under relaxed resource dedication policy in multi-mode multi-project scheduling", International Journal of Mathematics in Operational Research, Vol.14, No.4, 541-567 (NA)
    Ahmed, Faran and Kılıç, Kemal (2019) "Fuzzy analytic hierarchy process: a performance analysis of various algorithms", Fuzzy Sets and Systems, Vol.362, 110-128 (SCI, SSCI)
    Koç, Bahattin and Acar, Anıl Ahmet and Weightman, Andrew and Cooper, Glen and Blunn, Gordon and Bartolo, Paulo (2019) "Biomanufacturing of customized modular scaffolds for critical bone defects", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 209-212 (SCI)
    Kılıç, Kemal and Saygı, Menekşe Gizem and Sezer, Semih Onur (2019) "Exact and heuristic methods for personalized display advertising in virtual reality platforms", Journal of Industrial and Management Optimization, Vol.15, No.2, 833-854 (SCI, SSCI)
    Tunç, Lütfi Taner (2019) "Smart tool path generation for 5-axis ball-end milling of sculptured surfaces using process models", Robotics and Computer Integrated Manufacturing, Vol.56, 212-221 (SCI)
    Tunç, Lütfi Taner and Zatarain, Mikel (2019) "Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 401-404 (SCI)
    Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Topuz, Fuat and Afghah, Seyedeh Ferdows and Erman, Batu and Koç, Bahattin (2019) "Nanocomposite bioinks based on agarose and 2D nanosilicates with tunable flow properties and bioactivity for 3D bioprinting", ACS Applied Bio Materials, Vol.2, No.2, 796-806 (ESCI)
    Akçapınar, Kudret and Gürbüz, Özgür and Ünlüyurt, Tonguç (2019) "Power allocation and routing for full-duplex multi hop wireless networks under full interference", Ad Hoc Networks, Vol.82, 91-99 (SCI)
    Frenk, Hans and Javadi Khatab, Sonya and Pourakbar, Morteza and Sezer, Semih Onur (2019) "An exact static solution approach for the service parts end-of-life inventory problem", European Journal of Operational Research, Vol.272, No.2, 496-504 (SCI, SSCI)
    Karaguzel, Umut and Budak, Erhan (2018) "Investigating effects of milling conditions on cutting temperatures through analytical and experimental methods", Journal of Materials Processing Technology, Vol.262, 532-540 (SCI)
    Kayıkçı, Yaşanur and Mutlu, Aysun and Çatay, Bülent (2018) "A decision support system and its application for international sea-rail multimodal freight transportation operations (Uluslararası deniz-demir yolu kombine yük taşımacılığı operasyonları için bir karar destek sistemi ve uygulaması)", Uludağ University Journal of The Faculty of Engineering, Vol.23, No.4, 99-116 (NA)
    Keskin Özel, Merve and Çatay, Bülent (2018) "A matheuristic method for the electric vehicle routing problem with time windows and fast chargers", Computers and Operations Research, Vol.100, 172-188 (SCI, SSCI)
    Karadeniz Alver, Özlem and Ayvaz, Berk and Çatay, Bülent (2018) "A multi-objective reverse logistics network design for waste electrical and electronic equipment: the case of Istanbul (Atık elektrikli ve elektronik eşyalar için çok amaçlı bir tersine lojistik ağ tasarımı: İstanbul uygulaması)", Uludağ University Journal of The Faculty of Engineering, Vol.23, No.4, 41-54 (NA)
    Kocuk, Burak and Dey, Santanu S. and Andy, X. Sun (2018) "Matrix minor reformulation and SOCP-based spatial branch-and-cut method for the AC optimal power flow problem", Mathematical Programming Computation, Vol.10, No.4, 557-596 (ESCI)
    Topuz, Fuat and Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Menceloğlu, Yusuf Z. and Koç, Bahattin (2018) "Nanosilicate embedded agarose hydrogels with improved bioactivity", Carbohydrate Polymers, Vol.201, 105-112 (SCI)
    Ross, Caroline and Nizami, Bilal and Glenister, Michael and Amamuddy, Olivier Sheik and Atılgan, Ali Rana and Atılgan, Canan and Bishop, Özlem Tastan (2018) "MODE-TASK: large-scale protein motion tools", Bioinformatics, Vol.34, No.21, 3759-3763 (SCI)
    Tunç, Lütfi Taner and Mohammadi, Yaser and Budak, Erhan (2018) "Destabilizing effect of low frequency modes on process damped stability of multi-mode milling systems", Mechanical Systems and Signal Processing, Vol.111, 423-441 (SCI)
    Toprakhisar, Burak and Nadernezhad, Ali and Bakırcı, Ezgi and Khani, Navid and Akdeniz Skvortsov, Gözde and Koç, Bahattin (2018) "Development of bioink from decellularized tendon extracellular matrix for 3D bioprinting", Macromolecular Bioscience, Vol.18, No.10 (SCI)
    Tavakol Aghaei, Vahid and Onat, Ahmet and Yıldırım, Sinan (2018) "A Markov chain Monte Carlo algorithm for Bayesian policy search", Systems Science and Control Engineering, Vol.6, No.1, 438-455 (ESCI)
    Tunç, Lütfi Taner and Ozsahin, Orkun (2018) "Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes", Advances in Manufacturing, Vol.6, No.3, 308-318 (SCI)
    Sahba, Pedram and Balcıoğlu, Barış and Banjevic, Dragan (2018) "Multilevel rationing policy for spare parts when demand is state dependent", OR Spectrum, Vol.40, No.3, 751-780 (SCI, SSCI)
    Mohammadi, Yaser and Azvar, Milad and Budak, Erhan (2018) "Suppressing vibration modes of spindle-holder-tool assembly through FRF modification for enhanced chatter stability", CIRP Annals - Manufacturing Technology, Vol.67, No.1, 397-400 (SCI)
    Koca, Esra and Yaman, Hande and Aktürk, M. Selim (2018) "Stochastic lot sizing problem with nervousness considerations", Computers and Operations Research, Vol.94, 23-37 (SCI, SSCI)
    Dayan, Cem Balda and Afghah, Seyedeh Ferdows and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Çulha, Mustafa and Koç, Bahattin (2018) "Modeling 3D melt electrospinning writing by response surface methodology", Materials & Design, Vol.148, 87-95 (SCI)
    Ulusoy, Gündüz (2018) "İmalat sektöründe endüstri 4.0 dönüşümü çabaları: bazı gözlemler", İktisat ve Toplum, Vol.8, No.92, 121-123 (NA)
    Cakir, Esin and Özlü, Emre and Bakkal, Mustafa and Budak, Erhan (2018) "Investigation of temperature distribution in orthogonal cutting through dual-zone contact model on the rake face", International Journal of Advanced Manufacturing Technology, Vol.96, No.1-4, 81-89 (SCI)
    Shahmoradi, Zahed and Ünlüyurt, Tonguç (2018) "Failure detection for series systems when tests are unreliable", Computers & Industrial Engineering, Vol.118, 309-318 (SCI)
    Hodaei, Amin and Akhlaghi Baghoojari, Omid and Khani, Navid and Aytaş, Tunahan and Sezer, Dilek and Tatlı, Buse and Menceloğlu, Yusuf Z. and Koç, Bahattin and Akbulut, Özge (2018) "Single additive enables 3D printing of highly loaded iron oxide suspensions", ACS Applied Materials & Interfaces, Vol.10, No.11, 9873-9881 (SCI)
    Rezaei, Hamed and Sadeghi, Mohammad Hossein and Budak, Erhan (2018) "Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V", International Journal of Advanced Manufacturing Technology, Vol.95, No.5-8, 1617-1634 (SCI)
    Bagherzadeh, Amin and Budak, Erhan (2018) "Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach", Tribology International, Vol.119, 510-520 (SCI)
    Tunç, Lütfi Taner (2018) "Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body", International Journal of Advanced Manufacturing Technology, Vol.95, No.5-8, 1891-1909 (SCI)
    Ross, Caroline Jane and Atılgan, Ali Rana and Taştan Bishop, Özlem and Atılgan, Canan (2018) "Unraveling the motions behind Enterovirus 71 uncoating", Biophysical Journal, Vol.114, No.4, 822-838 (SCI)
    Azvar, Milad and Budak, Erhan (2017) "Multi-dimensional chatter stability for enhanced productivity in different parallel turning strategies", International Journal of Machine Tools and Manufacture, Vol.123, 116-128 (SCI)
    Abdizadeh, Haleh and Atılgan, Ali Rana and Atılgan, Canan and Dedeoğlu, Burcu (2017) "Computational approaches for deciphering the equilibrium and kinetic properties of iron transport proteins", Metallomics, Vol.9, No.11, 1513-1533 (SCI)
    Çinicioğlu, Esma Nur and Ulusoy, Gündüz and Önsel Ekici, Şule and Ülengin, Füsun and Ülengin, Burç (2017) "Exploring the interaction between competitiveness of a country and innovation using Bayesian networks", Innovation and Development, Vol.7, No.2, 175-209 (NA)
    Brown, David K. and Penkler, David L. and Amamuddy, Olivier Sheik and Ross, Caroline and Atılgan, Ali Rana and Atılgan, Canan and Bishop, Özlem Taştan (2017) "MD-TASK: a software suite for analyzing molecular dynamics trajectories", Bioinformatics, Vol.33, No.17, 2768-2771 (SCI)
    Yiğit, Ufuk and Ciğeroğlu, Ender and Budak, Erhan (2017) "Chatter reduction in boring process by using piezoelectric shunt damping with experimental verification", Mechanical Systems and Signal Processing, Vol.94, 312-321 (SCI)
    Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan (2017) "Modelling thermally induced deformations on tool during turn-milling (Frezeyle tornalamada takımda ortaya çıkan termal deformasyonların modellenmesi)", Journal of the Faculty of Engineering and Architecture of Gazi University, Vol.32, No.3, 865-875 (SCI)
    Yılmaz Eroğlu, D. and Kılıç, Kemal (2017) "A novel hybrid genetic local search algorithm for feature selection and weighting with an application in strategic decision making in innovation management", Information Sciences, Vol.405, 18-32 (SCI)
    Rahmat, Amin and Koç, Bahattin and Yıldız, Mehmet (2017) "A systematic study on numerical simulation of electrified jet printing". Published Online First http://dx.doi.org/10.1016/j.addma.2017.08.004
    Esmaeili Aliabadi, Danial and Kaya, Murat and Şahin, Güvenç (2017) "Competition, risk and learning in electricity markets: an agent-based simulation study", Applied Energy, Vol.195, 1000-1011 (SCI, SSCI)
    Bakırcı, Ezgi and Toprakhisar, Burak and Zeybek, Mehmet Can and Özaydın İnce, Gözde and Koç, Bahattin (2017) "Cell sheet based bioink for 3D bioprinting applications", Biofabrication, Vol.9, No.2 (SCI)
    Daldal, Rebi and Özlük, Özgür and Selçuk, Barış and Shahmoradi, Zahed and Ünlüyurt, Tonguç (2017) "Sequential testing in batches", Annals of Operations Research, Vol.253, No.1, 97-116 (SCI)
    Abdizadeh, Haleh and Tamer, Yusuf Talha and Acar, Ömer and Toprak, Erdal and Atılgan, Ali Rana and Atılgan, Canan (2017) "Increased substrate affinity in the escherichia coli L28R dihydrofolate reductase mutant causes trimethoprim resistance", Physical Chemistry Chemical Physics, Vol.19, No.18, 11416-11428 (SCI)
    Abdizadeh, Haleh and Atılgan, Ali Rana and Atılgan, Canan (2017) "Mechanisms by which salt concentration moderates the dynamics of human serum transferrin", Journal of Physical Chemistry B, Vol.121, No.18, 4778-4789 (SCI)
    Khani, Navid and Nadernezhad, Ali and Bartolo, Paulo and Koç, Bahattin (2017) "Hierarchical and spatial modeling and bio-additive manufacturing of multi-material constructs", CIRP Annals - Manufacturing Technology, Vol.66, No.1, 229-232 (SCI)
    Kılıç, Kemal and Saygı, Menekşe Gizem and Sezer, Semih Onur (2017) "A mathematical model for personalized advertisement in virtual reality environments", Mathematical Methods of Operations Research, Vol.85, No.2, 241-264 (SCI)
    Hosseini, Seyed Ahmad and Şahin, Güvenç and Ünlüyurt, Tonguç (2017) "A penalty-based scaling algorithm for the multi-period multi-product distribution planning problem", Engineering Optimization, Vol.49, No.4, 583-596 (SCI)
    Allen, Sarah R. and Hellerstein, Lisa and Kletenik, Devorah and Ünlüyurt, Tonguç (2017) "Evaluation of monotone DNF formulas", Algorithmica, Vol.77, No.3, 661-685 (SCI)
    Şensoy, Özge and Atılgan, Ali Rana and Atılgan, Canan (2017) "FbpA iron storage and release are governed by periplasmic microenvironments", Physical Chemistry Chemical Physics, Vol.19, No.8, 6064-6075 (SCI)
    Frenk, Hans and Pourghannad, Behrooz and Sezer, Semih Onur (2017) "A static model in single leg flight airline revenue management", Transportation Science, Vol.51, No.1, 214-232 (SCI)
    Esmaeili Aliabadi, Danial and Kaya, Murat and Şahin, Güvenç (2017) "An agent-based simulation of power generation company behavior in electricity markets under different market-clearing mechanisms", Energy Policy, Vol.100, 191-205 (SCI)
    Özkırımlı, Ömer Mehmet and Tunç, Lütfi Taner and Budak, Erhan (2016) "Generalized model for dynamics and stability of multi-axis milling with complex tool geometries", Journal of Materials Processing Technology, Vol.238, 446-458 (SCI)
    Esmaeili Aliabadi, Danial and Kaya, Murat and Şahin, Güvenç (2016) "Determining collusion opportunities in deregulated electricity markets", Electric Power Systems Research, Vol.141, 432-441 (SCI)
    Ünlüyurt, Tonguç and Tunçer, Yasir (2016) "Estimating the performance of emergency medical service location models via discrete event simulation", Computers & Industrial Engineering, Vol.102, 467-475 (SCI)
    Khani, Navid and Yıldız, Mehmet and Koç, Bahattin (2016) "Elastic properties of coiled carbon nanotube reinforced nanocomposite: a finite element study", Materials & Design, Vol.109, 123-132 (SCI)
    Kahvecioğlu, Gökçe and Balcıoğlu, Ahmet Barış (2016) "Coping with production time variability via dynamic lead-time quotation", OR Spectrum, Vol.38, No.4, 877-898 (SCI)
    Tunç, Lütfi Taner (2016) "Rapid extraction of machined surface data through inverse geometrical solution of tool path information", International Journal of Advanced Manufacturing Technology, Vol.87, No.1-4, 353-362 (SCI)
    Aksu, Burak and Çelebi, Ceren and Budak, Erhan (2016) "An experimental investigation of oblique cutting mechanics", Machining Science and Technology, Vol.20, No.3, 495-521 (SCI)
    Nadernezhad, Ali and Khani, Navid and Akdeniz Skvortsov, Gözde and Toprakhisar, Burak and Bakırcı, Ezgi and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koç, Bahattin (2016) "Multifunctional 3D printing of heterogeneous hydrogel structures", Scientific Reports, Vol.6 (SCI)
    Özler, Saime Burçe and Bakırcı, Ezgi and Küçükgül, Can and Koç, Bahattin (2016) "Three-dimensional direct cell bioprinting for tissue engineering". Published Online First http://dx.doi.org/10.1002/jbm.b.33768
    Munoa, J. and Beudaert, X. and Dombovari, Z. and Altıntaş, Y. and Budak, Erhan and Brecher, C. and Stepan, G. (2016) "Chatter suppression techniques in metal cutting", CIRP Annals - Manufacturing Technology, Vol.65, No.2, 785-808 (SCI)
    Dayanık, Savaş and Sezer, Semih Onur (2016) "Sequential sensor installation for Wiener disorder detection", Mathematics of Operations Research, Vol.41, No.3, 827-850 (SCI)
    Tunç, Taner L. and Özkırımlı, Ömer Mehmet and Budak, Erhan (2016) "Machining strategy development and parameter selection in 5-axis milling based on process simulations", International Journal of Advanced Manufacturing Technology, Vol.85, No.5-8, 1483-1500 (SCI)
    Tunç, Lütfi Taner and Budak, Erhan and Bilgen, Samet and Zatarain, Mikel (2016) "Process simulation integrated tool axis selection for 5-axis tool path generation", CIRP Annals - Manufacturing Technology, Vol.65, No.1, 381-384 (SCI)
    Carlier, Aurelli and Akdeniz Skvortsov, Gözde and Hafezi, Forough and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin and Oosterwyck, Hans Van (2016) "Computational model-informed design and bioprinting of cell-patterned constructs for bone tissue engineering", Biofabrication, Vol.8, No.2 (SCI)
    Daldal, Rebi and Gamzu, Iftah and Segev, Danny and Ünlüyurt, Tonguç (2016) "Approximation algorithms for sequential batch-testing of series systems", Naval Research Logistics, Vol.63, No.4, 275-286 (SCI)
    Türker, Uraz Cengiz and Ünlüyurt, Tonguç and Yenigün, Hüsnü (2016) "Effective algorithms for constructing minimum cost adaptive distinguishing sequences", Information and Software Technology, Vol.74, 69-85 (SCI)
    Karagüzel, Umut and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa (2016) "Effects of tool axis offset in turn-milling process", Journal of Materials Processing Technology, Vol.231, 239-247 (SCI)
    Budak, Erhan and Özlü, Emre and Bakioğlu, Hayri and Barzegar Osgouei, Zahra (2016) "Thermo-mechanical modeling of the third deformation zone in machining for prediction of cutting forces", CIRP Annals - Manufacturing Technology, Vol.65, No.1, 121-124 (SCI)
    Emeç, Uğur and Çatay, Bülent and Bozkaya, Burçin (2016) "An adaptive large neighborhood search for an e-grocery delivery routing problem", Computers and Operations Research, Vol.69, 109-125 (SCI)
    Keskin, Merve and Çatay, Bülent (2016) "Partial recharge strategies for the electric vehicle routing problem with time windows", Transportation Research Part C: Emerging Technologies, Vol.65, 111-127 (SCI)
    Davari, Soheil and Kılıç, Kemal and Naderi Varandi, Siamak (2016) "A heuristic approach to solve the preventive health care problem with budget and congestion constraints", Applied Mathematics and Computation, Vol.276, 442-453 (SCI)
    Öztürk, Erdem and Çomak, Alptunç and Budak, Erhan (2016) "Tuning of tool dynamics for increased stability of parallel (simultaneous) turning processes", Journal of Sound and Vibration, Vol.360, 17-30 (SCI)
    Abdizadeh, Haleh and Güven, Gökçe and Atılgan, Ali Rana and Atılgan, Canan (2015) "Perturbation response scanning specifies key regions in subtilisin serine protease for both function and stability", Journal of Enzyme Inhibition and Medicinal Chemistry, Vol.30, No.6, 867-873 (SCI)
    Akhmedov, Murodzhon and Çatay, Bülent and Apaydın, Serkan Mehmet (2015) "Automating unambiguous NOE data usage in NVR for NMR protein structure-based assignments", Journal of Bioinformatics and Computational Biology, Vol.13, No.6 (SCI)
    Özler, Saime Burçe and Küçükgül, Can and Koç, Bahattin (2015) "3-boyutlu biyobasım (3D bioprinting)", Türkiye Klinikleri Tıbbi Onkoloji Özel Dergisi, Vol.8, No.2, 155-161 (NA)
    Özbaykal, Gizem and Atılgan, Ali Rana and Atılgan, Canan (2015) "In silico mutational studies of Hsp70 disclose sites with distinct functional attributes", Proteins: Structure, Function and Bioinformatics, Vol.83, No.11, 2077-2090 (SCI)
    Köse, İlker and Göktürk, Mehmet and Kılıç, Kemal (2015) "An interactive machine-learning-based electronic fraud and abuse detection system in healthcare insurance", Applied Soft Computing, Vol.36, 283-299 (SCI)
    Özşahin, Orkun and Budak, Erhan and Özgüven, H. Nevzat (2015) "Identification of bearing dynamics under operational conditions for chatter stability prediction in high speed machining operations", Precision Engineering, Vol.42, 53-65 (SCI)
    Aslan, Deniz and Budak, Erhan (2015) "Surface roughness and thermo-mechanical force modeling for grinding operations with regular and circumferentially grooved wheels", Journal of Materials Processing Technology, Vol.223, 75-90 (SCI)
    Davari, Soheil and Kılıç, Kemal and Ertek, Gürdal (2015) "Fuzzy bi-objective preventive health care network design", Health Care Management Science, Vol.18, No.3, 303-317 (SCI)
    Abdizadeh, Haleh and Atılgan, Ali Rana and Atılgan, Canan (2015) "Detailed molecular dynamics simulations of human transferrin provide insights into iron release dynamics at serum and endosomal pH", Journal of Biological Inorganic Chemistry, Vol.20, No.4, 705-718 (SCI)
    Karagüzel, Umut and Uysal, Emre and Budak, Erhan and Bakkal, Mustafa (2015) "Analytical modeling of turn-milling process geometry, kinematics and mechanics", International Journal of Machine Tools and Manufacture, Vol.91, 24-33 (SCI)
    Karagüzel, Umut and Olgun, Utku and Uysal, Emre and Budak, Erhan and Bakkal, M. (2015) "Increasing tool life in machining of difficult-to-cut materials using nonconventional turning processes", International Journal of Advanced Manufacturing Technology, Vol.77, No.9-12, 1993-2004 (SCI)
    Küçükgül, Can and Özler, Saime Burçe and İnci, İlyas and Karakaş, Hacer Ezgi and Irmak, Ster and Gözüaçık, Devrim and Taralp, Alpay and Koç, Bahattin (2015) "3D bioprinting of biomimetic aortic vascular constructs with self-supporting cells", Biotechnology and Bioengineering, Vol.112, No.4, 811-821 (SCI)
    Tunç, Lütfi Taner and Özkırımlı, Ömer Mehmet and Budak, Erhan (2015) "Generalized cutting force model in multi-axis milling using a new engagement boundary determination approach", International Journal of Advanced Manufacturing Technology, Vol.77, No.1-4, 341-355 (SCI)
    Özşahin, Orkun and Budak, Erhan and Özgüven, H. Nevzat (2015) "In-process tool point FRF identification under operational conditions using inverse stability solution", International Journal of Machine Tools and Manufacture, Vol.89, 64-73 (SCI)
    Arslan, Alp Muzaffer and Frenk, Hans and Sezer, Semih Onur (2015) "On the single-leg airline revenue management problem in continuous time", Mathematical Methods of Operations Research, Vol.81, No.1, 27-52 (SCI)
    Kılıç, Kemal and Ulusoy, Gündüz and Günday, Gürhan and Alpkan, Lütfihak (2015) "Innovativeness, operations priorities and corporate performance: An analysis based on a taxonomy of innovativeness", Journal of Engineering and Technology Management, Vol.35, 115-133 (SCI)
    Beşikci, Umut and Bilge, Ümit and Ulusoy, Gündüz (2015) "Multi-mode resource constrained multi-project scheduling and resource portfolio problem", European Journal of Operational Research, Vol.240, No.1, 22-31 (SCI)
    Ulusoy, Gündüz and Kılıç, Kemal and Günday, Gürhan and Alpkan, Lütfihak (2015) "A determinants of innovativeness model for manufacturing firms", International Journal of Innovation and Regional Development, Vol.6, No.2, 125-158 (NA)
  • Kitaplar
    A closer look at milling machines and processes, Budak, Erhan (ed.), New York: Nova Science Publishers, April 2024
    Koç, Bahattin, Eklemeli imalat: tasarım felsefesini değiştiren yeni bir imalat anlayışı, Ankara: Nobel Akademik Yayıncılık, April 2024
    Ulusoy, Gündüz and Hazır, Öncü, "An introduction to project modeling and planning, Switzerland: Springer Nature, April 2021
  • Kitap Bölümleri
    Tehranizadeh, Faraz and Barzegar, Zahra and Budak, Erhan, "Special milling tools for improving productivity", A Closer Look at Milling Machines and Processes, Budak, Erhan (ed.), New York: Nova Science Publishers, April 2024, 207-241
    Wan, Min and Budak, Erhan and Zhang, Wei-Hong, "Mechanics and dynamics of thin-wall milling process", A Closer Look at Milling Machines and Processes, Budak, Erhan (ed.), New York: Nova Science Publishers, April 2024, 157-206
    Acar, Anıl Ahmet and Polat, Mehmet Furkan and Koç, Bahattin, "Eklemeli imalat için tasarım prensipleri", Tasarım Felsefesini Değiştiren Yeni Bir İmalat Anlayışı: Eklemeli İmalat, Yasa, Evren and Yılmaz, Oğuzhan and Kayacan, M. Cengiz and Saklakoğlu, İbrahim Etem (eds.), Ankara: Nobel Akademik Yayıncılık, April 2024, 255-298
    Ünal, Deha and Koç, Bahattin, "Malzeme ekstrüzyon yöntemleri", Tasarım Felsefesini Değiştiren Yeni Bir İmalat Anlayışı: Eklemeli İmalat, Yasa, Evren and Yılmaz, Oğuzhan and Kayacan, M. Cengiz and Saklakoğlu, İbrahim Etem (eds.), Ankara: Nobel Akademik Yayıncılık, April 2024, 31-60
    Koç, Bahattin and Acar, Anıl Ahmet and Fallah, Ali and Daskalakis, Evangelos and Xu, Zhanyan and Omar, Abdalla M. and Liu, Fengyuan and Cooper, Glen and Weightman, Andrew and Blunn, Gordon and Bartolo, Paulo, "Designing novel synthetic grafts for large bone defects: experimental and numerical studies", Experiments and simulations in advanced manufacturing, Kyratsis, Panagiotis and Davim, J. Paulo (eds.), Switzerland: Springer, Cham, April 2021, 71-89
    Rastani, Sina and Yüksel, Tuğçe and Çatay, Bülent, "Electric vehicle routing problem with time windows and cargo weight", Smart and Sustainable Supply Chain and Logistics – Trends, Challenges, Methods and Best Practices, Golinska-Dawson, Paulina and Tsai, Kune-Muh and Kosacka-Olejnik, Monika (eds.), Switzerland: Springer, Cham, December 2020, 175-190
    Daskalakis, Evangelos and Liu, Fengyuan and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon, "Bioglasses for bone tissue engineering", Bio-Materials and Prototyping Applications in Medicine, Bártolo, Jorge and Bidanda, Bopaya (eds.), Switzerland: Springer International Publishing, October 2020, 165-193
    Hafezi, Forough and Küçükgül, Can and Özler, Saime Burçe and Koç, Bahattin, "Bioprinting: application of additive manufacturing in medicine", Additive Manufacturing, Second Edition, Bandyopadhyay, Amit and Bose, Susmita (eds.), Boca Raton, London, New York: CRC Press, October 2019
    Budak, Erhan, "Machining process improvement through process twins", Proceedings of 3rd International Conference on the Industry 4.0 Model for Advanced Manufacturing, Ni, Jun and Majstorovic, Vidosav D. and Djurdjanovic, Dragan (eds.), Switzerland: Springer, May 2018, 164-179
    Köse, İlker and Kılıç, Kemal, "Büyük veri ve bilimi ile sahteciliğin ve suistimalin önlenmesi", Büyük Veri Analitiği, Güvenliği ve Mahremiyeti: Tanimlar, Problemler, Uygulamalar, Stratejiler, Hukuk, Politikalar, Büyük Etki ve Öneriler, Sağıroğlu, Şeref (ed.), Ankara: Grafiker Yayınları, July 2017
    Özler, Saime Burçe and Küçükgül, Can and Koç, Bahattin, "Bioprinting with live cells", Bioprinting in Regenerative Medicine, Türksen, Kürşad (ed.), Switzerland: Springer, September 2015, 67-88
    Hafezi, Forough and Küçükgül, Can and Özler, Saime Burçe and Koç, Bahattin, "Bioprinting: application of additive manufacturing in medicine", Additive Manufacturing, Bandyopadhyay, Amit and Bose, Susmita (eds.), United States: CRC Press, June 2015, 197-214
  • Konferans Bildirileri
    Farea, Shawqi Mohammed Othman and Ünel, Mustafa and Koç, Bahattin, "Defect prediction in directed energy deposition using an ensemble of clustering models", 22nd IEEE International Conference on Industrial Informatics (INDIN), Institute of Electrical and Electronics Engineers, August 2024
    Cheng, Cheng and Yıldırım, Sinan and Tourneret, Jean-Yves, "Auxiliary particle filtering with variational inference for jump Markov systems with unknown measurement noise covariance", 32nd European Signal Processing Conference (EUSIPCO 2024), European Association for Signal Processing (EURASIP), August 2024, 2522-2526
    Koltsaklis, Nikolaos, "Market-based generation expansion planning", 20th International Conference on the European Energy Market (EEM), IEEE Computer Society, June 2024
    Tunç, Lütfi Taner and Sheikhi, Mohammad and Moldovan, Catalin and Gutiu, Eugen and Balc, Nicolae, "Non-planar 5-axis directional additive manufacturing of plastics: machine, process, and tool path", SME North American Manufacturing Research Conference (NAMRC 52), SME, June 2024
    Çatay, Bülent and Eshtehadi, Reza, "Improving the route planning of battery electric freight vehicles through speed optimization", 7th International Symposium on Innovative Approaches in Smart Technologies (ISAS), Institute of Electrical and Electronics Engineers, November 2023
    Sheikhi, Mohammad and Gutiu, Eugene and Moldovan, Catalin and Tunç, Lütfi Taner, "Effects of process parameters on the quality off non-planar 5-axis printing of free form surfaces", 15th International Conference on Modern Technologies In Manufacturing (MTeM 2023), TU Cluj Napoca, October 2023
    Taşpınar, Rabia and Kocuk, Burak, "Discretization-based solution approaches for the circle packing problem", Drobne, S. and Stirn, L. Z. and Borstnar, M. K. and Povh, J. and Povh, J. and Zerovnik, J. (eds.), 17th International Symposium on Operational Research in Slovenia, SOR 2023, Slovenian Society Informatika, September 2023, 383-386
    Kienast, Pascal and Tunç, Lütfi Taner and Koca, Recep and Olgu, Ozan and Ganser, Philip and Bergs, Thomas, "Improving dynamic process stability in finishing of thin-walled workpieces by optimal selection of stock shape", 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Elsevier, July 2023
    Alparslan, Barış and Yıldırım, Sinan and Birbil, Ş. İlker, "Differentially private distributed Bayesian linear regression with MCMC", 40th International Conference on Machine Learning, PMLR, July 2023, 637-641
    Ebrahimi Araghizad, Arash and Tehranizadeh, Faraz and Kılıç, Kemal and Budak, Erhan, "Smart tool-related faults monitoring system using process simulation-based machine learning algorithms", Jedrzejewski, Jerzy (ed.), XXXIV CIRP Sponsored Conference, Poland: Wroclaw University of Science and Technology, June 2023
    Atılgan, Canan and Liu, Gökşin and Jalalpour, Farzaneh and Ekmen, Erhan and Berksöz, Melike and Atılgan, Ali Rana and Sayers, Zehra, "Increased ionic strength triggers multiple conformations in both apo and holo forms of bacterial ferric binding protein", Biophysical Society Annual Meeting, Elsevier, February 2023, 444A-445A
    Akbay, Ümmühan and Kaya, Murat, "Personality traits in supply chain contracting", 1st Australian International Conference on Industrial Engineering and Operations Management, IEOM Society, December 2022, 3144-3154
    Karkili, G. B. and Ünlüyurt, Tonguç, "Optimization models for routing and frequency assignment in wireless mesh networks", IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), IEEE Computer Society, December 2022, 566-570
    Tehranizadeh, Faraz and Budak, Erhan, "Special milling tools to suppress self-excited chatter vibrations in milling", Conte, G. and Molnar, T. (eds.), 17th IFAC Workshop on Time Delay Systems, TDS 2022, Elsevier, December 2022, 115-120
    İslim, Raci Berk and Çatay, Bülent, "The effect of battery degradation on the route optimization of electric vehicles", Cruz-Cunha, Maria Manuela and Mateus-Coelho, Nuno (eds.), International Conference on Industry Sciences and Computer Science Innovation, Elsevier, September 2022, 1-8
    Hatipoğlu, Ersen and Bakkal, Mustafa and Budak, Erhan, "On the finite element modeling best practices for the metal cutting simulations", Kılıç, Engin (ed.), 19th International Conference on Machine Design and Production (UMTIK), Atilim University, August 2022
    Akbay, Ümmühan and Kaya, Murat, "Effect of personality on newsvendor decisions", 7th North American International Conference on Industrial Engineering and Operations Management, IEOM Society, June 2022, 1445-1452
    Arabacı, Polen and Kocuk, Burak, "Robust portfolio optimization models when stock returns are a mixture of normals", Yang, Hui and Qiu, Robin and Chen, Weiwei (eds.), INFORMS International Conference on Service Science, ICSS 2020, Springer Cham, January 2022, 419-430
    Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Budak, Erhan, "Dalgalı talaş yüzeyli takımların kararlılık analizi ve takım optimizasyonu [Stability analysis of crest-cut end mills and the optimization of tool geometry]", Özlü, Emre (ed.), 11th International Congress on Machining (UTIS), UTIS, December 2021
    Yıldız, Saltuk and Tehranizadeh, Faraz and Rahimzadeh Berenji, Kaveh and Yavaş, Çağlar and Kurt, Seçil and Budak, Erhan, "Evaluation of carbide end mills with different cutting geometries in machining of a titanium alloy", Özlü, Emre (ed.), 11th International Congress on Machining (UTIS), UTIS, December 2021
    Yüksel, Esra and Özlü, Emre and Oral, Ahmet and Tosun, Fulya and İğrek, Osman Fatih and Budak, Erhan, "Gantry optimization of a 5-axis cnc machine tool considering dynamic modes", Özlü, Emre (ed.), 11th International Congress on Machining (UTIS), UTIS, December 2021
    Urresti, Ramon Torres Iker and Tunç, Lütfi Taner and Munoa, Jokin and Memis, Namik Kemal and Orbegozo, Iban and Ece, Remzi Ecmel and Torres, Ramon, "Spindle and cutting tools for internal suction of chip and dust in CFRP trimming", 11th International Congress on Machining (UTIS 2021), -, December 2021
    Rahimzadeh Berenji, Kaveh and Ozsahin, Orkun and Budak, Erhan, "Effect of spindle design on spindle dynamics and chatter stability", International Symposium on Precision Engineering and Sustainable Manufacturing PRESM2021, The Korean Society for Precision Engineering, July 2021
    Karataş, Gamze and Özsahin, Orkun and Ozguven, Nevzat and Budak, Erhan, "Design optimization of tool holder extension for enhanced chatter stability by using component mode tuning method", 9th CIRP Conference on High Performance Cutting, Elsevier, May 2021, 294-297
    Tuncer, Deniz and Kocuk, Burak, "Misocp relaxations for the unit commitment problem with ac power flows", 11th Annual International Conference on Industrial Engineering and Operations Management, IEOM 2021, IEOM Society, March 2021, 586-587
    Yıldırım, Sinan and Kaya, Kamer and Aydın, Soner and Erentuğ, Hakan Buğra, "Differentially private frequency sketches for intermittent queries on large data streams", IEEE International Conference on Big Data (Big Data), Institute of Electrical and Electronics Engineers, December 2020, 4083-4092
    Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner, "Improved vision based pose estimation for industrial robots via sparse regression", 16th International Conference on Intelligent Computing, ICIC 2020, Springer, October 2020, 121-132
    Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner, "Improving vision based pose estimation using LSTM neural networks", 46th Annual Conference of the IEEE Industrial Electronics Society (IECON 2020), IEEE (Institute of Electrical and Electronics Engineers), October 2020, 483-488
    Bilal, Diyar Khalis and Ünel, Mustafa and Yıldız, Mehmet and Koç, Bahattin, "Localization and estimation of bending and twisting loads using neural networks", 46th Annual Conference of the IEEE Industrial Electronics Society (IECON 2020), IEEE Computer Society, October 2020, 489-494
    Yüksel, Esra and Özlü, Emre and Oral, Ahmet and Tosun, Fulya and İğrek, Osman Fatih and Budak, Erhan, "Design and analysis of a 5-axis gantry CNC machine tool", Mansour, G. and Tzetzis, D. and Kyratsis, P. (eds.), 7th International Conference of Materials and Manufacturing Engineering (ICMMEN 2020), EDP Sciences, August 2020
    Daskalakis, Evangelos and Liu, Fengyuan and Acar, Anıl Ahmet and Dinea, Edera-Elena and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon and Bártolo, Paulo Jorge, "3D-printed composite bone bricks for large bone tissue applications", Mansour, G. and Tzetzis, D. and Kyratsis, P. (eds.), 7th International Conference of Materials and Manufacturing Engineering (ICMMEN 2020), EDP Sciences, August 2020
    Shokirov, Nozir and Çatay, Bülent and Ünlüyurt, Tonguç, "Crew constrained home health care routing problem with time windows and synchronized visits", Çalışır, Fethi and Korhan, Orhan (eds.), Global Joint Conference on Industrial Engineering and Its Application Areas (GJCIE 2019), Springer, March 2020, 87-96
    Keskin, Merve and Akhavan Tabatabaei, Raha and Çatay, Bülent, "Electric vehicle routing problem with time windows and stochastic waiting times at recharging stations", 2019 Winter Simulation Conference (WSC), IEEE (Institute of Electrical and Electronics Engineers), December 2019, 1649-1659
    Gönül, Bora and Tunç, Lütfi Taner, "Model based analysis of kinematic redundancy for increased chatter stability in robotic milling", 10th International Congress on Machining, UTIS, November 2019
    Özcan, Yiğit and Tunç, Lütfi Taner, "Experimental investigation on tool path patterns in controlled depth abrasive water jet machining", 15th International Conference on High Speed Machining (HSM 2019), CMTS (Czech Machine Tool Society), October 2019
    Tunç, Lütfi Taner and Seçer, Ragıp Orkun, "Investigation of process damping in robotic milling", 15th International Conference on High Speed Machining (HSM 2019), CMTS (Czech Machine Tool Society), October 2019
    Işık, Murat and Kısa, Erdal and Koç, Bahattin and Yıldız, Mehmet and Pehlivanoğulları, Barış and Orhangül, Akın and Poyraz, Özgür and Akbulut, Güray, "Topology optimization and finite elemental analysis for an inconel 718 engine mounting bracket manufactured via electron beam melting", Additive Manufacturing Conference (AMCTURKEY), TAMA (Turkish Additive Manufacturing Association), October 2019
    Daskalakis, Evangelos and Aslan, Enes and Liu, Fengyuan and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon and Bartolo, P. J., "Composite scaffolds for large bone defects", Almeida, Henrique A. and Vasco, Joel C. (eds.), 1st International Conference on Progress in Digital and Physical Manufacturing, ProDPM 2019, Springer Cham, September 2019, 250-257
    Daskalakis, Evangelos and Liu, Fengyuan and Smith, Benedict and Acar, Anıl Ahmet and Aslan, Enes and Cooper, Glen and Weightman, Andrew and Koç, Bahattin and Blunn, Gordon and Bártolo, Paulo Jorge, "Polymer-ceramic bone bricks for tissue engineering", AMMM - Additive Manufacturing Meets Medicine 2019, Infinite Science Publishing, September 2019
    Özşahin, Orkun and Ritou, Mathieu and Budak, Erhan and Rabréau, Clément and Le Loch, Sebastien, "Identification of spindle dynamics by receptance coupling for non-contact excitation system", Mcleay, T. and Öztürk, Erdem and Msaoubi, R. (eds.), 17th CIRP Conference on Modelling of Machining Operations, Sheffield, UK: Elsevier, June 2019, 273-278
    Gönül, Bora and Sapmaz, Ömer Faruk and Tunç, Lütfi Taner, "Improved stable conditions in robotic milling by kinematic redundancy", Mcleay, Tom and Öztürk, Erdem and Msaoubi, Rachid (eds.), 17th CIRP Conference on Modelling of Machining Operations, Elsevier, June 2019, 485-490
    Kocuk, Burak and Van Hoeve, Willem Jan, "A computational comparison of optimization methods for the Golomb ruler problem", Rousseau, Louis-Martin and Stergiou, Kostas (eds.), 16th International Conference on the Integration of Constraint Programming, Artificial Intelligence, and Operations Research, CPAIOR 2019, Springer Cham, April 2019, 409-425
    Yüksel, Esra and Budak, Erhan and Ertürk, Ahmet, "Machine tool design optimization considering thermo-mechanical behaviour in the structure and at the interfaces", 8th International Conference on Virtual Machining Process Technology (VMPT 2019), UBC, April 2019
    Tavakol Aghaei, Vahid and Ağababaoğlu, Arda and Onat, Ahmet and Yıldırım, Sinan, "Bayesian learning for policy search in trajectory control of a planar manipulator", Chakrabarti, S. and Saha, H. N. (eds.), IEEE 9th Annual Computing and Communication Workshop and Conference (CCWC), Institute of Electrical and Electronics Engineers, March 2019, 240-246
    Afghah, Seyed Mohamad Reza and Özlük, Özgür and Ünlüyurt, Tonguç, "Capacity allocation and pricing strategies for cloud computing service providers", Xu, Xun and Dessouky, Mohamed and Zhong, Ray (eds.), 48th International Conference on Computers & Industrial Engineering 2018 (CIE48), Curran Associates, February 2019, 1337-1359
    Daldal, Rebi and Shahmoradi, Zahed and Ünlüyurt, Tonguç, "Estimating the expected cost of function evaluation strategies", Çalışır, Fethi and Çevikcan, Emre and Camgöz Akdağ, Hatice (eds.), Global Joint Conference on Industrial Engineering and Its Application Areas (GJCIE 2018), Springer, January 2019, 229-239
    Afghah, R. and Özlük, Ö. and Ünlüyurt, Tonguç, "Capacity allocation and pricing policies for cloud computing service providers", Zhong, R. Y. and Dessouky, M. I. and Xu, X. (eds.), 48th International Conference on Computers and Industrial Engineering, CIE 2018, Curran Associates Inc., December 2018
    Rahimzadeh Berenji, Kaveh and Özlü, Emre and Budak, Erhan, "An experimental study on surface errors in orthogonal turn-milling process", 9th International Congress on Machining (UTIS 2018), UTIS, November 2018
    Barzegar Osgouei, Zahra and Özlü, Emre and Altan, Erhan and Budak, Erhan, "Heat modeling for third deformation zone", 9th International Congress on Machining (UTIS 2018), UTIS, November 2018
    Özcan, Yiğit and Tunç, Lütfi Taner, "Investigation of surface mophology and integrity in multi axis abrasive waterjet machining (AWJM)", International Symposium on Machining,, November 2018
    Sapmaz, Ömer Faruk and Tunç, Lütfi Taner, "Kinematic based selection of the workpiece location in robotic milling", International Symposium on Machining,, November 2018
    Akdeniz Skvortsov, Gözde and Piluso, Susanna and Altunbek, Mine and Khani, Navid and Oosterwyck, Hans Van and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin, "3D bioprinting of cell-laden molecularly engineered PEG-based hydrogels", Biofabrication Conference 2018, Wurzberg, Germany: ISBF (International Society for Biofabrication), October 2018
    Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Koç, Bahattin, "Nanocomposite hydrogels of agarose/nanosilicates for 3D bioprinting applications", Biofabrication Conference 2018, Wurzberg, Germany: ISBF (International Society for Biofabrication), October 2018
    Çakmak, Umut Can and Çatay, Bülent and Apaydın, Serkan Mehmet, "A neural network approach for predicting speeds on road networks", 26th Signal Processing and Communications Applications Conference (SIU 2018), USA: IEEE (Institute of Electrical and Electronics Engineers), July 2018, 1-4
    Jamshidi, Hamid and Budak, Erhan, "Grinding temperature modeling based on a time dependent heat source", Stephan, Gabor (ed.), 8th CIRP Conference on High Performance Cutting (HPC 2018), Elsevier, June 2018, 299-302
    Rahimzadeh Berenji, Kaveh and Kara, Mehmet Emre and Budak, Erhan, "Investigating high productivity conditions for turn-milling in comparison to conventional turning", Stepan, Gabor (ed.), 8th CIRP Conference on High Performance Cutting (HPC 2018), Elsevier, June 2018, 259-262
    Keskin Özel, Merve and Laporte, Gilbert and Çatay, Bülent, "Electric vehicle routing problem with time dependent waiting times at recharging stations", 7th International Workshop on Freight Transportation and Logistics (ODYSSEUS 2018), University of Cagliari, June 2018, 258-261
    Vrabic, Rok and Kozjek, Dominik and Öztürk, Erdem and Tunç, Lütfi Taner and Malus, Andreja and Butala, Peter, "Identification of the CIRP expertise network based on public data", Kjellberg, T. and Wang, L. and Ji, W. and Wang, X. V. (eds.), 51st CIRP Conference on Manufacturing Systems, Elsevier, June 2018, 165-168
    Mutlu, Aysun and Kayıkçı, Yaşanur and Çatay, Bülent, "Deniz-demir yolu uluslararası kombine yük taşımacılığı operasyonları için karar destek sistemi", 7. Ulusal Lojistik ve Tedarik Zinciri Kongresi, Lojistik Derneği, Uludağ Üniversitesi, May 2018
    Karadeniz Alver, Özlem and Ayvaz, Berk and Çatay, Bülent, "Elektrikli ve elektronik atıklar için tersine lojistik ağ tasarımı: İstanbul örneği", 7. Ulusal Lojistik ve Tedarik Zinciri Kongresi, Lojistik Derneği, Uludağ Üniversitesi, May 2018
    Çakmak, Umut Can and Apaydın, Serkan Mehmet and Çatay, Bülent, "Traffic speed prediction with neural networks", Kliewer, Natalia and Ehmke, Jan Fabian and Borndörfer, Ralf (eds.), Annual International Conference of the German Operations Research Society (GOR), Springer, May 2018, 737-743
    Rahimzadeh Berenji, Kaveh and Karagüzel, Umut and Özlü, Emre and Budak, Erhan, "Development of turn-milling machine tool program parameters based on basic cutting geometry", 8th International Symposium on Machining, UTIS, November 2017
    Barzegar Osgouei, Zahra and Budak, Erhan and Özlü, Emre, "Modeling of tool temperature in orthogonal cutting", 8th International Symposium on Machining, UTIS, November 2017
    Tunç, Lütfi Taner and Sapmaz, Ömer Faruk, "Challenges for industrial robots towards milling applications", 8th International Symposium on Machining (UTIS 2017), UTIS, November 2017
    Kayıkçı, Yaşanur and Çatay, Bülent, "A revenue-based slot allocation and pricing framework for multimodal transport networks", Pawar, Kulwant and Potter, Andrew and Lisec, Andrej (eds.), 22nd International Symposium on Logistics (ISL 2017), Nottingham University Business School, July 2017, 672-679
    Mutlu, Aysun and Kayıkçı, Yaşanur and Çatay, Bülent, "Planning multimodal freight transport operations: a literature review", Pawar, Kulwant and Potter, Andrew and Lisec, Andrej (eds.), 22nd International Symposium on Logistics (ISL 2017), Nottingham University Business School, July 2017, 553-560
    Çatay, Bülent and Keskin, Merve, "The impact of quick charging stations on the route planning of electric vehicles", IEEE Symposium on Computers and Communications (ISCC 2017), IEEE Computer Society, July 2017
    Nadernezhad, Ali and Khani, Navid and Koç, Bahattin, "Biomanufacturing of heterogeneous hydrogel structures with patterned electrically conductive regions", Shih, Albert and Cao, Jian (eds.), 3rd CIRP Conference on BioManufacturing, Elsevier, July 2017, 44-47
    Kale, Sameer and Khani, Navid and Nadernezhad, Ali and Koç, Bahattin, "Modeling and additive manufacturing of biomimetic heterogeneous Scaffold", Shih, Albert and Cao, Jian (eds.), 3rd CIRP Conference on BioManufacturing, Elsevier, July 2017, 48-55
    Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan, "Mechanical and thermal modeling of orthogonal turn-milling operation", Outerio, Jose and Poulachon, Gerard (eds.), 16th CIRP Conference on Modelling of Machining Operations (16TH CIRP CMMO), Elsevier, July 2017, 287-292
    Yüksel, Esra and Budak, Erhan and Ertürk, Ahmet S., "The effect of linear guide representation for topology optimization of a five-axis milling machine", Outeiro, J. and Poulachon, G. (eds.), 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO), Elsevier, June 2017, 487-492
    Tehranizadeh, Faraz and Budak, Erhan, "Design of serrated end mills for improved productivity", Outerio, Jose and Poulachon, Gerard (eds.), 16th CIRP Conference on Modelling of Machining Operations (16TH CIRP CMMO), Elsevier, June 2017, 493-498
    Mohammadi, Yaser and Tunç, Taner L. and Budak, Erhan, "Investigation of process damping effect for multi-mode milling systems", Outeiro, J. and Poulachon, G. (eds.), 16th CIRP Conference on Modelling of Machining Operations (16TH CIRP CMMO), Elsevier, June 2017, 198-203
    Akçapınar, Kudret and Gürbüz, Özgür and Ünlüyurt, Tonguç, "Optimal power control for full duplex wireless networks with full interference", First International Balkan Conference on Communications and Networking (BalkanCom 2017), Academy of Sciences of Albenia, June 2017
    Yaqoob, Muhammad Hassan and Budak, Erhan, "An alternative methodology for machine tool error determination through workpiece measurement", 6th International Conference on Virtual Machining Process Technology (VMPT), Elsevier, May 2017
    Jamshidi, Hamid and Yastıkcı, Batuhan and Gürtan, Mert and Budak, Erhan, "Grinding force model for Inconel 718 with CBN and conventional wheels", 6th International Conference on Virtual Machining Process Technology (VMPT), Elsevier, May 2017
    Çatay, Bülent and Keskin, Merve, "Elektrikli araç rotalama problemi: farklı modeller üzerine bir inceleme", 6.Ulusal Lojistik ve Tedarik Zinciri Kongresi, Lojistik Derneği, Akdeniz Üniversitesi, May 2017
    Ermiş, Gizem and Çatay, Bülent, "Accelerating local search algorithms for the travelling salesman problem through the effective use of GPU", 19th EURO Working Group on Transportation Meeting (EWGT2016), Elsevier, May 2017, 409-418
    Kleiner, Florian and Beermann, Martin and Çatay, Bülent and Beers, Eric and Davies, Huw and Lim, Ock Taeck, "Current status of the electrification of transport logistic vehicles - Early niche markets and commercialization opportunities", European Battery, Hybrid and Fuel Cell Electric Vehicle Congress (EEVC-2017), Geneva, Switzerland: Electri-city.mobi, March 2017
    Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan, "Frezeyle tornalamada takımda ortaya çıkan termal deformasyonların modellenmesi", Kaynak, Yusuf (ed.), 7. Uluslararası Talaşlı İmalat Sempozyumu (UTİS 2016), Marmara University, November 2016
    Yastıkcı, Batuhan and Jamshidi, Hamid and Budak, Erhan, "Experimental investigation of wear mechanisms with electroplated CBN wheel", 19th International Symposium on Advances in Abrasive Technology, ISAAT, October 2016
    Abdizadeh, Haleh and Atılgan, Ali Rana and Atılgan, Canan, "Computational modeling of iron binding and release in human serum transferrin", 41st FEBS Congress on Molecular and Systems Biology for a Better Life, Wiley Online Library, September 2016, 73-73
    Budak, Erhan, "Improving productivity in machining processes through modeling", Bleicher, Friedrich (ed.), 3. Wiener Produktionstechnik Kongress 2016 Adaptive & Smart Manufacturing, TU Vienna, September 2016
    Azvar, Milad and Budak, Erhan, "Multi-dimensional modelling of chatter stability in parallel turning operation", 17th International Conference on Machine Design and Production, Atilim University, July 2016
    Toprakhisar, Burak and Bakırcı, Ezgi and Koç, Bahattin, "3D bioprinting stem-cells with solubilized tendon extracellular matrix (ECM) based hydrogel", Towards Future Regenerative Therapies (TERMIS-EU 2016), Uppsala, Sweden: AO Research Institute, July 2016, 460-460
    Bakırcı, Ezgi and Toprakhisar, Burak and Zeybek, Mehmet Can and İnce, Gözde and Koç, Bahattin, "Cell sheet as a bioink for 3D bioprinting", Towards Future Regenerative Therapies (TERMIS-EU 2016), Uppsala, Sweden: AO Research Institute, July 2016, 461-461
    Erdil, Ertunç and Yıldırım, Sinan and Çetin, Müjdat and Taşdizen, Tolga, "MCMC shape sampling for image segmentation with nonparametric shape priors", 29th IEEE Conference on Computer Vision and Pattern Recognition Workshops (CVPRW), USA: IEEE (Institute of Electrical and Electronics Engineers), June 2016, 411-419
    Karagüzel, Umut and Bakkal, Mustafa and Budak, Erhan, "Modeling and measurement of cutting temperatures in milling", 7th CIRP Conference on High Performance Cutting (HPC 2016), Elsevier, June 2016, 173-176
    Yılmaz, E. E. and Budak, Erhan and Özgüven, H. Nevzat, "Modeling and measurement of micro end mill dynamics using inverse stability approach", 7th CIRP Conference on High Performance Cutting (HPC 2016), Elsevier, June 2016, 242-245
    Ahmed, Faran and Kılıç, Kemal, "Comparison of fuzzy extent analysis technique and its extensions with original eigen vector approach", Maciaszek, L. and Camp, O. and Cordeiro, J. and Hammoudi, S. and Maciaszek, L. and Missikoff, M. M. and Cordeiro, J. (eds.), 18th International Conference on Enterprise Information Systems (ICEIS 2016), SciTePress, April 2016, 174-179
    Ahmed, Faran and Kılıç, Kemal, "Fuzzy extent analysis: comparison of defuzzification methods", 6th International Conference on Industrial Engineering and Operations Management (IEOM 2016), IEOM Society, March 2016, 1013-1018
    Sevinç, Mete and Ulusoy, Gündüz, "Innovation clusters and determinants of innovativeness in manufacturing industries", Ali, Ahad and Bon, Abdul Talib (eds.), 6th International Conference on Industrial Engineering and Operations Management (IEOM 2016), USA: IEOM Society, March 2016, 1041-1051
    Abdizadeh, Haleh and Acar, Ömer and Güçlü, Tandaç Fürkan and Tamer, Yusuf Talha and Altınuşak, Tuğçe and Toprak, Erdal and Atılgan, Ali Rana and Atılgan, Canan, "Computational assessment of trimethoprim resistance in dihydrofolate reductase", 60th Annual Meeting of the Biophysical Society, Cell Press, February 2016, 47A-48A
    Shi, Wei and Weise, Thomas and Chiong, Raymond and Çatay, Bülent, "Hybrid PACO with enhanced pheromone initialization for solving the vehicle routing problem with time windows", IEEE Symposium Series on Computational Intelligence (2015), USA: IEEE (Institute of Electrical and Electronics Engineers), December 2015, 1735-1742
    Özdemir, Enver Doruk and Kleiner, Florian and Beermann, Martin and Çatay, Bülent and Beers, Eric and Moran, Bob and Lim, Ock Taeck and Schmid, Stephan A., "Status and trends for electrified transport logistic vehicles", Proceedings of the European Battery, Hybrid and Fuel Cell Electric Vehicle Congress (EEVC-2015), Brussels, Belgium: Electri-city.mobi, December 2015
    Bakioğlu, Hayri and Özlü, Emre and Budak, Erhan, "Dik kesme modelinde üçüncü deformasyon bölgesi kuvvetlerinin termomekanik modellenmesi", Budak, Erhan (ed.), 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul: Sabanci University, November 2015
    Özşahin, Orkun and Budak, Erhan and Özgüven, Nevzat H., "Frezeleme esnasındaki tezgâh dinamiğinin belirlenmesi ve modellenmesi", Budak, Erhan (ed.), 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul: Sabanci University, November 2015
    Hatipoğlu, Ersen and Budak, Erhan and Bakkal, Mustafa, "Mikro frezeleme işleminde yüzey oluşumunun modellenmesi", Budak, Erhan (ed.), 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul: Sabanci University, November 2015
    Yalçın, Turgut Köksal and Erberdi, Muharrem and Özlü, Emre and Budak, Erhan, "Yüksek hızlı iş millerinin termal modellemesi", Budak, Erhan (ed.), 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul: Sabanci University, November 2015
    Keskin, Merve and Çatay, Bülent, "The electric vehicle routing problem: outlook and recharging strategies", Aydın, Ulviyye and Tanyaş, Mehmet and Keskin, Hakan (eds.), 13th International Logistics and Supply Chain Congress, Izmir, Turkey: Loder / Izmir University, October 2015, 828-838
    Ahmed, Faran and Kılıç, Kemal, "Modification to fuzzy extent analysis method and its performance analysis", Framinan, J. M. and Gonzalez, P. P. and Artiba, A. (eds.), International Conference on Industrial Engineering and Systems Management (IESM 2015), USA: IEEE (Institute of Electrical and Electronics Engineers), October 2015, 435-438
    Putz, M. and Ihlenfeldt, S. and Karagüzel, U. and Semmler, U. and Budak, Erhan and Bakkal, Mustafa and Wertheim, R., "Improving performance of turn-milling by controlling forces and thermally induced tool-center point (TCP) displacement", Holger, Kohl and Seliger, Gunter and Mallon, Jurgen (eds.), 13th Global Conference on Sustainable Manufacturing: Decoupling Growth from Resource Use, Amsterdam: Elsevier, September 2015
    Yıldırım, Mahir Umman and Çatay, Bülent, "An ant colony-based matheuristic approach for solving a class of vehicle routing problems", Corman, Francesco and Voß, Stefan and Negenborn, Rudy R. (eds.), 6th International Conference on Computational Logistics (ICCL 2015), Switzerland: Springer International Publishing, September 2015, 105-119
    Bilgen, Samet and Özlü, Emre and Erberdi, Muharrem S. and Budak, Erhan, "An experimental study of CNC machine tool feed drive limits and cycle time prediction for a 3-axis milling operation", Kaftanoğlu, Bilgin and Budak, Erhan (eds.), 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Ankara: Atilim University, June 2015
    Hatipoğlu, Ersen and Budak, Erhan and Bakkal, Mustafa, "Experimental investigation of tool wear in micro milling", Kaftanoğlu, Bilgin and Budak, Erhan (eds.), 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Ankara: Atilim University, June 2015
    Albayrak, Mehmet and Yalçın, Turgut Köksal and Erberdi, Muharrem and Özlü, Emre and Budak, Erhan, "Static and dynamic analysis of different machine tool spindles", Kaftanoğlu, Bilgin and Budak, Erhan (eds.), 8th International Conference and Exhibition on Design and Production of Machines and DIES/MOLDS, Ankara: Atilim University, June 2015
    Karagüzel, Umut and Budak, Erhan and Bakkal, Mustafa, "Cutting temperature and tool wear in turn-milling", Altıntaş, Yusuf (ed.), 4th International Conference on Virtual Machining Process Technology, Canada, Vancouver, BC: UBC (University of British Columbia), May 2015
    Çelebi, Ceren and Özlü, Emre and Budak, Erhan, "Experimental and analytical investigation of third deformation zone in orthogonal cutting", Altıntaş, Yusuf (ed.), 4th International Conference on Virtual Machining Process Technology, Canada, Vancouver, BC: UBC (University of British Columbia), May 2015
    Bakioğlu, Hayri and Özlü, Emre and Budak, Erhan, "Thermo-mechanical modeling of cutting forces in micro endmilling operations", Altıntaş, Yusuf (ed.), 4th International Conference on Virtual Machining Process Technology, Canada, Vancouver, BC: UBC (University of British Columbia), May 2015
    Kleiner, Florian and Özdemir, Enver Doruk and Schmid, Stephan A. and Beermann, Martin and Çatay, Bülent and Moran, Bob and Lim, Ock Taeck and Friedrich, Horst E., "Electrification of transport logistic vehicles: a techno-economic assessment of battery and fuel cell electric transporter", 28th International Electric Vehicle Symposium (EVS 28), Goyang, South Korea: Korean Society of Automotive Engineers, May 2015
    Çapa, Canan and Ulusoy, Gündüz, "Proactive project scheduling in an R&D department: a bi-objective genetic algorithm", International Conference on Industrial Engineering and Operations Management (IEOM 2015), USA: IEEE (Institute of Electrical and Electronics Engineers), March 2015, 966-971
    Tozlu, Başak and Daldal, Rebi and Ünlüyurt, Tonguç and Çatay, Bülent, "Crew constrained home care routing problem with time windows", IEEE Symposium Series on Computational Intelligence (2015), USA: IEEE (Institute of Electrical and Electronics Engineers) 2015, 1751-1757
  • Editörlügü Yapilan Kitaplar / Özel Nüshalar
    Urbikain, Gorka and Olvera-Trejo, Daniel and Budak, Erhan and Wan, Min, Special issue on machining systems and signal processing: advancing machining processes through algorithms, sensors and devices, Elsevier, January 2023
    Budak, Erhan, Special issue: chatter stability of machining processes, Springer, September 2018